Haier V700 User Manual page 8

after the voltage rises, the phone can be powered on normally.
In the power on state, when the power indicator in the icon area is full and
doesn't flash, the battery is fully charged. In the power off state, the
charge will be displayed on the screen if the battery is fully charged.
Insert and Remove the SIM Card
The function of dual card and one in using is provided, two SIM card slots are
available.
Power off, and then move away the external power supply and battery.
Insert SIM card into the box correctly.
Power off before removing the SIM card. Firstly remove the external power supply
And battery, and then remove to take out the SIM card.
Insert and Remove the Memory Card
Power off, and move away the external power supply.
Insert the memory card correctly.
Power off before removing the memory card, and move away the external power
supply, and then remove the card.
Note: Please carry your phone along with you during purchase of
T-Flash card to buy a compatible card. As a wide range of T-Flash cards
are available in the market, In order to ensure your data safety, we advice
4
complete