Table of Contents
Advertisement
Highlight enable Recognition and press OK.
Use the up/down navigation key to select
between On and Off.
While on the main idle screen, you may also
enable voice command by pressing and holding
the right soft key
for at least three seconds,
or until you are prompted to "Say Command."
Say "Detail" or press the left soft key
display a list of commands you can use.
NOte. To call a contact using voice command, say the name
exactly as it is listed in the phonebook. For example, to call an
entry named Michael Philip, simply say "Call Michael Philip."
You can also create a Speech Dependent (SD)
tag for contact lists, shortcut lists, and city lists.
An SD tag is a customized tag that you want
the phone to associate with a particular entry.
For example, you want to call an entry named
Michael Philip, but you only want to say his
nickname, "Mike."
To create an SD tag:
1. Go to Settings > Phone Settings >
Voice Command Settings > SD tags.
2. Highlight the item you want to create an
SD tag for. Choose the entry from the list,
then press Options.
3. When the next screen appears, press OK
to add.
4. Say the name/tag after the beep. When
done, press OK.
The Digit Adaptation item in the Voice
Command menu allows you to improve the
phone's recognition rate. Say a command string
to enable the phone to recognize your voice
and the manner by which you utter commands.
The Preferred Digit Length option allows you
to turn on/off the digit length settings and select
to
the digit lengths you prefer using the enter key.
Flight Mode
Setting the phone to flight mode disables all call
functions to save power consumption and avoid
call disruptions while playing media files. Go to
Settings > Phone Settings > Flight Mode to
set your mode preference.
Greeting text
The Settings > Phone Settings > Greeting
text option sets a short phrase that appears
each time the phone is turned on.
Set the status to On if you want the text to
appear, or to Off if you do not want it to appear.
Enter or edit the greeting text using the keypad.
Auto Update of Date and time
Auto update of date and time is a network
service that automatically updates the date and
time in your phone when you travel or if daylight
savings time is used in your area.
37
Advertisement
Table of Contents
