0 4
|
WARNING:
I
Never draw or shoot your bow without all string accessories (peep
sight, kisser button, nock points, D-Loop, string silencers, string weights, and
speed weights) properly installed and secured to the string. Do not use brass or
other metal clamp-on nocking point or string weight devices. Hoyt recommends
that only a Genuine Hoyt Retailer install all string accessories. (see page 6 for
definition of Hoyt Bow Safe Operating Parameters).
WARNING:
I
Never expose your string or cables to sharp objects such as knives
or broadheads, or direct heat sources such as open flame or extremely hot
objects as they could easily cut or cause the string and/or cables to break.
WARNING:
I
Never draw a bow with mismatched or missing cam modules,
module screws and/or set screws. Never draw a bow with a missing or incor-
rectly installed draw stop peg. Never remove the cam control cable peg. Be sure
to thoroughly check these areas of the cam with an allen wrench to ensure they
are fully tightened and that modules are not mismatched.
WARNING:
I
While servicing Hoyt compound bows, it may be necessary to
remove and reinstall e-clips on the ends of the axles. It is critical that the
e-clips are installed correctly. If e-clips are not installed correctly, it is likely
that one or more of the limbs will work their way off the end of the axle, causing
the bow come apart and may result in injury to user or bystanders (see page 12
for installation instructions).
WARNING:
I
Do not draw or shoot bow without the cable guard, cable slide
and/or rollers properly installed, adjusted and tightened.
WARNING:
I
Only use genuine Hoyt manufactured replacement parts, including
replacement strings and cables. Only Hoyt or a Genuine Hoyt Retailer should
perform replacement of damaged parts. Hoyt recommends that all mainte-
nance or service that requires the use of a bow press only be performed by a
Genuine Hoyt Retailer. The use of an improper style bow press on your Hoyt bow
or the incorrect use of any bow press on your bow may result in severe damage
to the bow. Failure to heed this warning could result in death or serious per-
sonal injury or death to yourself or bystanders (see page 9 for definition of an
appropriate style press for Hoyt bows).
WARNING:
I
Never expose your Hoyt carbon bow to any solvents or lubricants
as the structure could become weakened.
I
WARNING:
Never expose your carbon bow to direct impact. If impact occurs,
return your bow to Hoyt or take your bow to a Genuine Hoyt Retailer for inspec-
tion and required repair.
WARNING:
I
Never expose your bow to extreme heat or prolonged moisture.
Damage can occur to your bow from heat exposure, prolonged exposure to
moisture, and improper storage.
I I
WARNING:
Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
I
WARNING:
When handling and using a bow, including all stages of the bow
being drawn to full draw, the bowstring being released, or the bow being let
down, the archer and all bystanders must keep all body parts outside of the
path of the bowstring and away from all moving parts.
WARNING:
I
It is critical that your bow is set up and functioning within the
bow's required safe operating parameters prior to use. Hoyt recommends that
only a Genuine Hoyt Retailer setup and inspect your archery equipment to
ensure that it is set up within the bow's safe operating parameters. After your
bow is set up within the bow's required safe operating parameters, the bow
should be tuned for improved accuracy based on your shooting style and form,
the arrow type and size used, and all other accessories used. See page 7 for tips
and basic tuning procedures.
WARNING:
I
Never use aftermarket strings or cables on your bow. Aftermarket
strings and cables may not be suitable for replacement on your Hoyt bow. Hoyt
cannot guarantee that the materials or the manufacturing methods used by
aftermarket string and cable manufacturers will be suitable for use on your
Hoyt bow. Failure to heed this warning could result in serious injury or death to
yourself or bystanders. Only Genuine Hoyt or Fuse-branded strings and cables
should be used on a Hoyt bow.
WARNING:
I
Never move, remove, or add additional string weights to your Hoyt
bow's string or cables. Strings weights are specifically engineered for weight
and location to ensure correct operation of your bow. Alterations to string and
cable speed weights could cause your bow to break or malfunction and could
cause serious injury or death.
Need help?
Do you have a question about the TARGET COMPOUND and is the answer not in the manual?