Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Glass Expansion D-Torch Agilent 5000 ICP-OES Series
Summary of Contents for Glass Expansion D-Torch Agilent 5000 ICP-OES Series
- Page 1 User Guide for D-Torch Agilent 5000 Series ICP-OES ® INS-0276...
-
Page 2: Before You Start
Item 7. Metal ball-joint clip is provided to fix the ICP spray chamber in place with the D-Torch. Item 2 Item 1 Item 4 Item 3 Item 6 Item 7 Item 8 Item 9 Item 5 Glass Expansion® Version 1 Page 2... - Page 3 It is our customer’s entire responsibility to safely store, handle and use the products ordered from Glass Expansion. We assume the requisitioner to be experienced, competent, safety conscious professionals. Glass Expansion assumes no liability for any damage or injuries -physical, emotional or mental, arising out of persons incorrectly or inappropriately using or handling our products.
- Page 4 2.1 Ensure the D-Torch is fully inserted before engaging the torch lever. The inner tube should be no less than 10mm below the RF coil before engaging this lever. 10mm Torch Lever Step 2.1a Step 2.1b Glass Expansion® Version 1 Page 4...
- Page 5 Tighten the retainer to fix the outer tube in place (Moderate pressure by hand is adequate – Do not over tighten). Step 4.1 Step 4.2 Step 4.3 You can now return the D-Torch to your ICP as normal (not shown). Glass Expansion® Version 1 Page 5...
- Page 6 Step 5.2 complete To re-install Injector to the D-Torch Repeat steps 5.1 and 5.2 in reverse order. Critical note: Push the injector all the way into the adaptor (injector must be seated in the correct position). Glass Expansion® Version 1 Page 6...
- Page 7 Hint: It will help if you pivot the injector ferrule tool (similar to step 5.1) whilst pushing-in the injector ferrule. Step 6.2 Step 6.2 continued Step 6.2 complete Finished: If you have any questions regarding the D-Torch assembly or this procedure, please contact your supplier. Glass Expansion® Version 1 Page 7...
-
Page 8: Consumables List
Retaining Ring for D-Torch Outer Tube 31-808-3578 Injector Adaptor for D-Torch SAFEGLOVE-med Safety Gloves, Medium 70-803-0920 Injector Ferrule Tool 6.0mm 70-803-1500 O-ring kit for Agilent D-Torch ICP-OES 50-100-1636 O-ring Removal Tool JC-13 Metal Ball-joint Clip Glass Expansion® Version 1 Page 8... - Page 9 For more information please visit www.geicp.com or contact one of our offices below Asia Pacific 6 Central Boulevard, Port Melbourne, VIC 3207, Australia Telephone: +61 3 9320 1111 Email: enquiries@geicp.com Americas 31 Jonathan Bourne Drive, Unit 7 Pocasset, MA 02559, USA Telephone: 508 563 1800 Email: geusa@geicp.com Europe...
Need help?
Do you have a question about the D-Torch Agilent 5000 ICP-OES Series and is the answer not in the manual?
Questions and answers