Crewsaver 275N SEACREWSADER 2010 Service Manual page 68

Crewsaver - Servicing Manual : 275N Seacrewsader 2010 Lifejacket
8.9 Packing Instructions - Seacrewsader 2010 Working Jacket
13
Fold the remainder of the chamber that extends outside
the cover, into the centre of the folded chamber tucking
the chin support A under the folded chamber.
15
Fold the lower third of the inflation chamber down to
expose the Velcro on the rear cover.
Date: April 2016
Issue No: 7
275N Crewfit Twin 2010
A
14
Close the cover by running the zip from the bottom of
the cover up to the end of the zip and back. Tuck the
excess zip inside the cover ensuring the operating
lanyard is visible.
16
Fold half of the partially folded chamber, together with the
neck retaining webbing, back up to just below the Velcro
on the rear cover, keeping the webbing in contact with
the chamber.
DO NOT ALLOW RETAINING WEBBING TO PROTRUDE AS
(A) AND DO NOT FOLD ON TOP OF THE CHAMBER
Pull the front cover over the folded chamber and fasten
the Velcro ,
Section 8
A
Page
68
of 72