Summary of Contents for Crewsaver CREWFIT 165SPORT
Page 1
CREWFIT SPORT self care and maintenance manual...
Page 2
CLEANING & STORING YOUR LIFEJACKET It is important that the Crewsaver lifejacket is stored in a dry, well-ventilated space. If the lifejacket is wet or damp, and it is fitted with an automatic firing capsule, it is advisable to remove the capsule until the lifejacket is completely dry.
Page 3
Check the webbing for any fraying or damage. Open and close the buckles 3 times to ensure they are in working order. Safety harness inspection (if your Crewsaver model includes a harness) Inspect and check that all harness components have no visible signs of wear or damage.
Page 4
INSPECTION - STEP 4 Inspection of the bladder Inspect the bladder for any signs of abrasion, wear or damage. Ensure that all seams and folds are inspected thoroughly. Inflate the bladder using the red oral inflation tube. Once fully inflated hang the lifejacket on a coat hanger and leave inflated in a room with a stable temperature of approximately 20°C.
Page 5
If the green indicator is missing or detached – the automatic cartridge needs to be replaced (this can be purchased from a Crewsaver stockist or accredited service agent). If the automatic cartridge has been activated (as indicated by the missing green indicator), remove the automatic cartridge immediately by turning in an anti-clockwise direction.
Page 6
Screw in the undamaged or new 33g cylinder in a clockwise direction into the operating mechanism until hand tight. 7. Your manual operating mechanism is now rearmed. WARNING: If you are unsure or have any doubt how to re-arm and re-pack your lifejacket, return the product to Crewsaver or your nearest Service Agent.
Page 7
INSPECTION - STEP 8 Fill out Crewsaver Annual Self Care and Maintenance Certificate. This document must be filled out in full and pass all of the conditions in order to be a compliant piece of lifesaving equipment. If any elements fail, this lifejacket either needs to be replaced or sent to an accredited service agent.
Page 8
INSPECTION - STEP 10 REPACKING Repack the lifejacket in accordance with the model instructions as described in this manual. Make sure the manual pull lanyard is not tangled and that the lanyard knob is hanging outside the lifejacket cover. Ensure that your lifejacket is completely dry before packing. Run the zip slider round to the left side of the jacket.
Page 9
INSPECTION - STEP 10 (Continued) Fold the outside edge over the operating mechanism. Tuck chamber inside the cover and secure in place with Velcro tabs. Ensure the manual pull toggle is accessible. Fold the right side chin support diagonally underneath itself. Fold the bottom right of the chamber up over the oral tube.
Page 10
INSPECTION - STEP 10 (Continued) Fold the outside edge over. Tuck chamber inside the cover. Secure cover in place with the Velcro tabs. Concertina the chamber collar with two folds and tuck in the fabric neck retainer. Fold in the last corners of the chamber and bring the zip round to close. Make sure Velcro tabs are secure and zip ends are tucked up inside the cover.
Page 11
Inspection - Step 10 PASS FAIL Repack lifejacket in accordance to instructions I hereby certify that this lifejacket has been inspected in accordance with the Crewsaver Annual Self Care and Maintenance Manual as described in instructions 1 through 10. Next Inspection .........
Need help?
Do you have a question about the CREWFIT 165SPORT and is the answer not in the manual?
Questions and answers