Advertisement
Quick Links
Advertisement
Related Manuals for Crewsaver CREWFIT 150JUNIOR
Summary of Contents for Crewsaver CREWFIT 150JUNIOR
- Page 1 CREWFIT JUNIOR self care and maintenance manual...
- Page 2 CleaninG & stOrinG yOur lifejaCket It is important that the Crewsaver lifejacket is stored in a dry, well-ventilated space. If the lifejacket is wet or damp, and it is fitted with an automatic firing capsule, it is advisable to remove the capsule until the lifejacket is completely dry.
- Page 3 Ensure that you have completed the Self Care and Maintenance Registration Form and have posted or emailed it to the below address. You can download a copy from www.crewsaver.com/productregistration Survitec Group PO Box 6091, SILVERWATER BC 1811 Ph: 1800 646 086 Email: productregistration.au@survitecgroup.com...
- Page 4 insPeCtiOn - steP 4 Inspection of the bladder Inspect the bladder for any signs of abrasion, wear or damage. Ensure that all seams and folds are inspected thoroughly. Inflate the bladder using the red oral inflation tube. Once fully inflated hang the lifejacket on a coat hanger and leave inflated in a room with a stable temperature of approximately 20°C.
- Page 5 If the indicator remains red, this signifies that the cartridge has either been used or is faulty and MUST be replaced immediately. You can purchase this from your Crewsaver stockist.
- Page 6 Replace the valve cap (b) back into the normal position on top of the Inflation tube. WARNING: If you are unsure or have any doubt how to re-arm and re-pack your lifejacket, return the product to Crewsaver or your nearest service agent.
- Page 7 insPeCtiOn - steP 10 REPACKING Repack the lifejacket in accordance with the model instructions as described in this manual. Make sure the manual pull lanyard is not tangled and that the lanyard knob is hanging outside the lifejacket cover. Ensure that your lifejacket is completely dry before packing. Run the zip slider round to the left side of the jacket.
- Page 8 insPeCtiOn - steP 10 (Continued) Fold inner edge over to the right ensuring lifting becket is folded up into the cover. Fold outer side over twice. Tuck chamber inside the cover and secure in place with the Velcro tabs. Concertina the chamber collar with two folds and tuck in the fabric neck retainer. Fold in the last corners of the chamber and bring the zip round to close.
- Page 9 - step 10 Pass fail Repack lifejacket in accordance to instructions I hereby certify that this lifejacket has been inspected in accordance with the Crewsaver Annual Self Care and Maintenance Manual as described in instructions 1 through 10. Next Inspection .........
Need help?
Do you have a question about the CREWFIT 150JUNIOR and is the answer not in the manual?
Questions and answers