Multiple Sequence Cooking; More Or Less Time Adjustment - Viking RDMOR200SS Use And Care Manual

Control Panel and Settings

Multiple Sequence Cooking

Your Built-in Microwave Hood can be programmed for up to 4 auto-
matic cooking sequences, switching from one power level setting to
another automatically.
Sometimes cooking directions tell you to start on one power level and
then change to a different power level. Your Built-in Microwave Hood
can do this automatically.
• Roast beef - cook for 5 minutes at 100% and then continue to cook
for 30 minutes at 50%.
1. First enter cooking time. Then touch Power Level pad once for 100%
power.
2. Enter second cooking time. Touch Power Level pad 6 times for 50%
power.
3. Touch START/Add-A-Minute pad.
NOTE:
• If Power Level pad is touched once,
• If 100% is selected as the final sequence, it is not necessary to touch
the Power Level pad.
• Keep Warm Plus can be programmed even if 4 cooking sequences
have been set.

More or less time adjustment

Should you discover that you like any of the Instant Sensor, Sensor
Cook, Defrost, Reheat or Hot Water settings slightly
the Power Level pad once after touching your choice of pads or before
touching START/Add-A-Minute pad. The display will show
Should you discover that you like any of the Instant Sensor, Sensor
Cook, Defrost, Reheat or Hot Water settings slightly less done, touch
the Power Level pad twice after touching your choice of pads or before
touching START/Add-A-Minute pad. The display will show
E
HIGH will be displayed.
more
30
done, touch
MORE .
LESS .