Page 1
LCP1000M USE AND CARE GUIDE 650 LB POLY DUMP CART Questions, problems, missing parts? Before returning to the store, call Precision Customer Service 8 a.m. – 4 p.m., CST, Monday-Friday 1-800-225-5891 PRECISIONPRODINC.COM 4886-1 Rev 11/23 THANK YOU We appreciate the trust and confidence you have placed in Precision through the purchase of this 650 lb Poly Dump Cart. We strive to continually create quality products designed to enhance your home.
Pre-Assembly PLANNING INSTALLATION Remove the Hardware from the Hardware Sack and verify that all the Hardware shown is included. TOOLS REQUIRED (1) 9/16 in. Wrench Safety (1) Flat Head (1) Pliers goggles Screwdriver (1) 1/2 in. Wrench HARDWARE INCLUDED NOTE: Hardware not shown to actual size. ___B ___A ___C...
Assembly Under Carriage Assembly Pedestal Assembly □ Place a Reinforcing Strip (R) on the left and right □ Attach the Pedestal (P) to the Cart Body (M) side of the Undercarriage (O) and attach to the using 5/16 in. x 1 in. Hex Head Bolts (H), 5/16 in. bottom of the Cart Body (M) using 3/8 in.
Assembly Wheel Assembly □ Place a 3/4 in. Flat Washer (B), a Spacer (K), a 3/4 in. Flat Washer (B) onto the Axle (Q) up against the Wheel (L) Under Carriage (O). 1/8 in. x 1-1/4 in. □ Next place the Wheel (L) onto the Axle (Q). Spacer Cotter Pin (A) □...
Service Parts (continued) 650 LB POLY DUMP CART Ref # Part # Description Ref # Part # Description 4630R PEDESTAL 1044 5/16 IN. FLAT WASHER 4888 BODY 1275 5/16 IN. HEX HEAD NUT 1243VNW CLEVIS 1276 5/16 IN. LOCK WASHER 1265P LATCH HANDLE 1252...
Warranty 12 MONTH LIMITED WARRANTY FOR ACCESSORIES WHAT IS COVERED The limited warranty set forth below is given by Precision Products, Incorporated with respect to new merchandise purchased and used in the United States, its possessions and territories and Canada. The manufacturer warrants the product(s) listed against defects in material and workmanship, and will at our option, repair or replace, free of charge, any part found to be defective in materials or workmanship.
Need help?
Do you have a question about the LCP1000M and is the answer not in the manual?
Questions and answers