Download
Share
Print this page
  1. Manuals
  2. Brands
  3. RPS Manuals
  4. Motorcycle
  5. X-PRO Hawk 250
  6. Owner's manual

RPS X-PRO Hawk 250 Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
Hawk Dirt Bike
Minimum age requirement: 16
Always wear a helmet; It could save your Life!
This manual should be considered as a permanent part of the vehicle and should remain with
the vehicle when resold or otherwise transferred to a new user or operator. The manual contains
important safety information and instructions which should be read carefully before operating
the vehicle.

Advertisement

loading
Need help?

Need help?

Do you have a question about the X-PRO Hawk 250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for RPS X-PRO Hawk 250

Summary of Contents for RPS X-PRO Hawk 250

  • Page 1 OWNER’S MANUAL Hawk Dirt Bike Minimum age requirement: 16 Always wear a helmet; It could save your Life! This manual should be considered as a permanent part of the vehicle and should remain with the vehicle when resold or otherwise transferred to a new user or operator. The manual contains important safety information and instructions which should be read carefully before operating the vehicle.
  • Page 2 Introduction Congratulations on your purchase of the Ricky Power Sports LLC’ Hawk 250cc Dirt Bike. Take time to understand how your motorcycle works before riding. Scheduled service is a must and it is important to follow the break-in guidelines and pre-ride instructions. Make certain that you read the warranty coverage information provided and understand your responsibilities.

  • Page 3: Table Of Contents

    Contents Warranty....................... Pg. 1 Safety Information....................Pg. 2 Safety Labels....................... Pg. 3 Component Locations..................Pg. 4 Indicators......................Pg. 6 Controls....................... Pg. 7 Before Riding...................... Pg. 10 Pre-ride Inspection..................... Pg. 11 Loading Guidelines and Load Limits..............Pg. 12 Starting Procedures................... Pg. 13 Starting and Stopping Engine................

  • Page 4: Warranty

    Warranty Congratulations on your purchase of the Ricky Power Sports, LLC Hawk 250cc Dirt Bike. It is warranted to be free of manufacturing defects in the material of workmanship for a period of 90 days from the date of purchase. During the warranty period Ricky Power Sports, LLC will at its option repair, provide replacement parts or replace your Ricky Power Sports, LLC Hawk 250cc Dirt Bike at no charge.

  • Page 5: Safety Information

    Safety Information This user’s manual contains important safety and maintenance information. Read it carefully before riding. Failure to follow the warnings contained in this manual could result in INJURY or DEATH. ALWAYS WEAR A HELMET The operator and passenger (if any) of this vehicle should always wear a helmet approved by agencies such as the Department of Transportation (DOT), Safety Helmet Council of America (SHCA), or Snell Memorial Foundation (SNELL).

  • Page 6: Safety Labels

    Safety Labels The safety labels on your motorcycle provide you with important information do not remove them. If a label becomes too difficult to read or comes off contact Ricky Power Sports, LLC for replacements.

  • Page 7: Component Locations

    Components Locations...

  • Page 9: Indicators

    Indicators The indicators on your motorcycle help make you aware of possible issues, refer to them often. Speedometer - Shows the speed you are traveling miles per hour. Odometer - Tracks the total miles driven. Trip meter - Tracks the total miles driven on your trip. High beam indicator - Illuminates when hi beam lights are on.

  • Page 10: Controls

    Controls FUEL VALVE Fuel valve - Used to control the flow of gasoline from the fuel tank to the carburetor. ON - gasoline can flow to the carburetor. OFF - gasoline cannot flow to the carburetor. RES - gasoline can flow to the carburetor when you have run out of gas in the gas tank. Make sure to refuel as soon as possible.

  • Page 11: Ignition Switch

    Controls IGNITION SWITCH START BUTTON AND ENGINE STOP SWITCH Start button - Pushing the start button will start the engine. When button is pressed in the start motor will crank the engine, See starting procedures. Engine stop switch- In case of an emergency and a quick stop is necessary turn switch to the “OFF”...

  • Page 12: Trip Meter Reset

    Controls HEADLIGHT DIMMER SWITCH, TURN SIGNAL SWITCH AND HORN TRIP METER RESET Trip meter reset knob- By turning the knob counter clockwise you can reset the trip meter to zero (0).

  • Page 13: Before Riding

    Before Riding Before your first ride on your new motorcycle we strongly recommend you: ● Read the owner’s manual. ● Understand all safety labels. ● Know how to operate all controls. Before you ride each time, make sure: ● You are in good physical and mental health. ●...

  • Page 14: Pre-Ride Inspection

    Pre-Ride Inspection Before each ride check the condition of your bike to make sure that it does not have mechanical problems. Your motorcycle should always be in good riding condition to ensure the safety of you, your passenger (if any) and others around you. Be sure to check the following items before each ride: BRAKES - Press on the brake pedal and hold in brake lever to ensure that the brakes are operating correctly.

  • Page 15: Loading Guidelines And Load Limits

    Loading guidelines and load limits Your bike has been designed to carry you and one passenger. When a passenger is riding with you there will be a difference in the acceleration and braking. Load Limits Maximum weight capacity (including rider, passenger, accessories and cargo): 331 lbs (150kg) Maximum cargo weight: 25lbs (10kg) Loading guidelines...

  • Page 16: Starting Procedures

    Starting procedures ● Insert key hexagon into the groove turning anti-clockwise to “OPEN”。 ● Insert key into ignition, turn to “ON” position. ● Make sure the transmission is in the “NEUTRAL” position. ● Turn the engine stop switch to “RUN”. ●...

  • Page 17: Starting And Stopping Engine

    Starting and Stopping the Engine, Shifting Gears How to stop the engine Normal Engine Stop ● Shift into neutral and turn the ignition switch “OFF”. ● DO NOT leave the ignition switch “ON” while the engine stop switch if “OFF”, this will allow the lights to stay “ON”...

  • Page 18: Shifting Gears

    Shifting Gears Tips for learning how to shift for the inexperienced rider (continued): ● Reduce the throttle or shift to a higher gear before engine RPM’s get too high. ● Shift to a lower gear before the engine RPM’s get too low. ●...

  • Page 19: Braking

    Braking Your bike is equipped with a hand operated front hydraulic disc brake and a foot operated rear hydraulic disc brake. Your front brake provides 70% of your braking power. By using both front and rear brakes you will achieve faster, more stable and effective braking. To slow down or stop your bike apply front and rear brakes while down shifting.

  • Page 20: Parking

    Parking Try, when possible, to park on level ground. If you have no paved surface to park on, make sure the ground is firm. If it is necessary for you to park on a hill, position your rear wheel against the curb at an angle and leave the transmission in gear. While parked, use the side stand for support.

  • Page 21: Maintenance Safety

    Maintenance Safety This section will instruct you on how to perform some important routine maintenance. You can perform many of these tasks with the tools provided with the motorcycle. The more difficult tasks, such as wheel removal, should be performed by a professional technician. If you do not feel capable of performing any one task do not hesitate to contact your local service center for help.
  • Page 22 Maintenance Safety Including the regular maintenance and pre-ride inspection, perform the periodic checks once a month and once a week if you ride frequently. Check the odometer and perform any scheduled maintenance necessary. Tires - ● Check the air pressure and add air if needed. ●...
  • Page 23 Maintenance Schedule This portion of the manual will tell you how often to perform maintenance. The maintenance schedule is based on average riding conditions. If you ride more frequently than usual and in dusty or wet weather be sure to maintain your bike more often. We recommend that you have your local service center perform extensive maintenance and repairs unless you have advanced mechanical skills.
  • Page 24 Maintenance Safety I - Inspect, clean, adjust, lubricate or replace if necessary C - Clean A - Adjust L - Lubricate R – Replace...
  • Page 25 Maintenance Schedule I - Inspect, clean, adjust, lubricate or replace if necessary C - Clean A - Adjust L - Lubricate R – Replace...
  • Page 26 Maintenance Records To ensure proper maintenance keep record. If the motorcycle is sold be sure to include the maintenance records. All scheduled maintenance is considered normal operator cost if a service center performs these tasks you will be charged. Please use the tables below to keep track of all maintenance performed.

  • Page 27: Tool Kit And Owner's Manual Storage

    Tool kit and Owner’s manual storage Your tool kit is located in the tool kit bag. These tools may come in handy during minor roadside repairs and adjustments. Tools in tool kit: ● Open end wrench ● Standard Phillips screw driver ●...

  • Page 28: Fuel

    Fuel Fuel Recommendation Type - Unleaded Octane number - 90 or above Unleaded fuel procedures fewer engine deposits and will extend the life of the exhaust system components. We suggest you use regular unleaded fuel. Be sure to only use an octane number of 90 or higher.

  • Page 29: Fuel And Engine Oil

    Fuel and Engine Oil Refueling 1. Insert ignition key in the fuel fill cap and turn clockwise. 2. Open cap. 3. Add fuel to the bottom of the filler neck. Do not overfill. 4. After refueling, push cap into the filler neck until it snaps and locks. 5.
  • Page 30 Engine Oil Recommended Oil API classification Viscosity(weight) SAE 15W-40 ● Use the recommended oil, the oil does not need additives. ● Do not use graphite oil or oil with molybdenum additives. ● Do not use castor based racing oil, vegetable oil or non-detergent oil.
  • Page 31 Engine Oil Checking and Adding Oil 1. Park your motorcycle on level ground and use the side stand for support. 2. Start the engine and let it run for 3-5 minutes. 3. Turn the engine off and wait for at least 3 minutes. 4.
  • Page 32 Adding Engine Oil 7. Install the engine drain bolt and torque to 18lbs.ft (25Nm). 8. Fill crankcase with recommended oil - 1.6 US qt. 9. Reinstall the oil fill plug/dipstick 10. Start engine and let idle for 3-5 minutes. 11. Turn engine off and let stand for 2-3 minutes. 12.

  • Page 33: Air Cleaner

    Air Cleaner Be sure to clean the air cleaner more frequently if you are ridding in dusty or wet areas. You local service center can help you determine the correct service interval for your riding conditions. Use only the air cleaner specified for your motorcycle or one of equivalent quality. NOTICE: Using the correct air cleaner can prevent engine wear, damage, repairs, spark plug fouling and poor gas mileage.

  • Page 34: Crankcase Breather And Throttle

    Crankcase Breather and Throttle Crankcase Breather You should service the crankcase breather more often if you are riding at full throttle or in rain. Be sure to service, if there are deposits in the transparent section of the drain tube. Draining 1.

  • Page 35: Clutch

    Clutch System The proper free play adjustment of the clutch allows for a gradual, smooth engagement when shifting gears. Early wear can occur if you do not properly adjust the free play. Clutch Free Play Left handlebar inspection 1. Check free play, if needed adjust to specified adjustment. Upper Adjustment Always adjust using the upper clutch cable adjuster before using the lower adjustment.
  • Page 36 Clutch System If the upper clutch cable adjuster has reached its limit or you cannot obtain the correct free play, you may also use the lower clutch cable adjuster. 1. Loosen the upper lock nut and rotate the upper clutch cable adjuster in to maximum free play.

  • Page 37: Engine Idle Speed

    Engine Idle Speed For the best servicing you should visit your local service center. Adjusting the idle speed will not cure all problems in the engine fuel delivery system. Idle Speed Adjustment 1. If the engine is cold, start it and run for 10 minutes of stop and go riding. Turn the engine off.

  • Page 38: Spark Plug

    Spark Plug Spark Plug Recommendation Do not use any spark plug other than the one recommended in the heat recommended. NOTICE: If you use a spark plug in the improper heat range you can cause engine damage. Spark Plug Replacement: 1.

  • Page 39: Suspension

    Suspension The front and rear suspension systems consist of springs and hydraulic damping devices. The rear suspension system has a spring pre-load which adjusts the force needed to begin compression of the spring. Traction and comfort are acquired by the oil damper system. It hydraulically controls the compression and rebound of the suspension.

  • Page 40: Brakes

    Brakes Your bike uses hydraulic disc brakes( front and rear). Hydraulic Liquid Front Brake The brake fluid will drop as the or if there is a leak. To ensure there are no leaks, often check the brake system. You should also check the brake pads for wear and the brake fluid level. If you feel abnormal free play in the brake lever, check for wear on the brake pads.
  • Page 41 Brakes Other Inspections ● Make sure there are no leaks in the fluid lines. ● Check for loose fittings or damage to the fluid lines. NOTICE: Brake fluid can damage painted surfaces and plastic, handle with care. Clean any spills immediately. In case of contact with skin, wash thoroughly. Contact with eyes, wash thoroughly and see a doctor immediately.

  • Page 42: Tires

    Tires The tires on your motorcycle should be the proper type and size. They should be in good condition and properly inflated for the load that you are carrying. Air Pressure Check the air pressure in both tires before riding. Improper air pressure would effect handling, steering response, traction, tire life and rider comfort.

  • Page 43: Tire Replacement

    Replace tire immediately if the wear indicators are not visible. Tires and Tube Repair If your tire in punctured or damaged, please replace the tire, do not repair. A repaired tube may fail while riding, and is not as reliable as a new one. A temporary repair can be made in an emergency situation, but will not perform at its best.

  • Page 44: Drive Chain

    Drive Chain There is a riveted master link on the chain which connects the counter-shaft to the rear wheel sprockets. To keep moisture and dirt out the O-ring chain uses rubber rings between the side plates of the pin and roller links to seal in the lubricating grease. Proper lubrication and adjustment will help extend the life of the chain.
  • Page 45 Adjustment Every 500 miles you should check and adjust (if needed) the slack of the drive chain. If you are riding at high speeds the chain may need adjusting more often. 1. Place the bike on level ground using the side stand. Make sure the transmission is in neutral and the ignition switch if in the “OFF”...
  • Page 46 recheck the chain slack. 6. Torque the rear axle nut to 65ft.lbs (88Nm). If you do not have a torque wrench available make sure to have your local service center perform this task. 7. Lightly tighten the adjusting nuts and tighten the lock nuts while holding the adjusting nuts with a wrench.

  • Page 47: Battery

    Battery Your bike is equipped with battery. Please check the electrolyte level or add distilled water when they are shortage. NOTICE: If you remove the cap strip you can permanently damage the battery. Any electrical accessory will use currents from the battery. If you have electrical accessories on your motorcycle and you ride often, be sure to charge the battery frequently.
  • Page 48 Charging the Battery Charging the battery incorrectly may cause damage. Always read the instructions that came with the battery charger and follow all directions on the battery. For home charging we suggest you use a trickle charger. A trickle charger can be left connects for a long period of time without causing damage to the battery.

  • Page 49: Appearance Care

    Appearance Care You should always clean and polish your bike on a regular basis to keep it looking newer longer. General Recommendations ● You may use the following to clean your bike: - a mild, neutral detergent and water - a mild spray and cleaner/polisher - a mild cleaner/de greaser ●...

  • Page 50: Vehicle Identification

    Vehicle Identification Serial Numbers The frame (VIN) and engine serial numbers will be required when you register your bike. You may also need this information when ordering parts, make sure to keep these numbers in a safe spot. Frame number (VIN- Vehicle Identification Number) can be found on the left side of the front forks stamped into a metal plate.

  • Page 51: Specifications

    Specifications Overall length 2090mm Overall width 920mm Overall height 1400mm Wheel base 1370mm Curb mass 126kg Fuel recommendation Octane 90 or above Fuel tank capacity Engine oil recommendation API service classification SF SAE 15W-40 Passenger One driver or one passenger only...
  • Page 52 Specifications Displacement 229cc Bore and stroke 67×65mm Top speed 97km/h Compression ratio 9.0:1 TORCH D8RTC Spark plug（standard） Spark plug gap 0.6～0.8mm Idle speed 1500±150rpm Valve lash 0.05mm Front tire size 80/100-21 Rear tire size 110/100-18 Front tire pressure COLD 32psi(225kpa) Rear tire pressure COLD 40psi(280kpa) Battery...
  • Page 53 Specifications...

  • Page 54: Wire Diagram

    Wire Diagram...

  • Page 55: Emission Control System Warranty

    Ricky Power Sports, LLC. – EMISSION CONTROL SYSTEM WARRANTY YOUR WARRANTY RIGHTS AND OBLIGATIONS The emission control system warranty period for this vehicle begins on the date the vehicle is delivered to the first purchaser other than an authorized dealer, or the date it is first used as a demonstrator, lease, or company vehicle, whichever comes first and continues for 30 months after that date, or 5,000km, whichever comes first, provided there has been no abuse, neglect or improper maintenance of your vehicle.

  • Page 56: Exclusions And Limitations

    facility. Ricky Power Sports, LLC will not cover repairs performed outside of an authorized dealer or repair facility. The use of replacement parts not equivalent to the original parts may impair the effectiveness of your vehicle’s emission control system. If such a replacement part is used and an authorized dealer determines it is defective or causes a failure of a warranted part, your claim for repair to bring your vehicle into compliance with applicable standards may be denied.
  • Page 57 consequential or special damages of any description, whether arising out of express or implied warranty or any other contract, negligence or other tort or otherwise. No express emission control system warranty is given by Ricky Power Sports, LLC except as specifically set forth herein.

This manual is also suitable for:

Db-w022