Connection - Yamaha EF6600DE - Premium Generator Owner's Manual

A B
q
A-1 A-2
q
q
B-1 B-2
q
q q
AE00949

CONNECTION

Alternating Current (AC)
cC
9 Be sure all electric devices including the lines
and plug connections are in good condition
761-006
before connection to the generator.
9 Be sure any electric devices are turned off
before plugging it in.
9 Be sure the total load is within generator rated
output.
9 Be sure the receptacle load current is within
receptacle rated current.
761-046
1. Wind the power lead 2 or 3 turns around frame.
2. Start the engine.
3. Plug into AC receptacle.
4. Make sure the voltage meter indicates the rated
voltage (except for YG4000D) or the pilot light is
on (for YG4000D).
å Voltage meter
779-032a
∫ Pilot light
If the voltage meter does not indicate the rated volt-
age, adjust output voltage to rated voltage (for
EF5200DE/EF6600DE).
1 Voltage adjuster
779-039a
NOTE:
Turn the adjuster clockwise or counterclockwise to
increase or decrease output voltage.
5. Turn the AC switch (N.F.B.) and economy idle
switch to the "ON" and turn on any electric
devices.
763-194e
1
AC120V can be used. (EF4000DE/YG4000D)
A-1
q AC120V can be used. (EF5200DE/EF6600DE/
A-2
YG5200D/YG6600D/YG6600DE)
AC120V and 240V can be used. (EF4000DE/YG4000D)
B-1
AC120V and 240V can be used. (EF5200DE/
B-1
EF6600DE/YG5200D/YG6600D/YG6600DE)
763-195a
I "ON"
– 22 –