Fortin EVO ONE Installation Instructions Manual

ONE
REGULAR INSTALLATION & THAR-ONE-HON3
INSTALLATION
VEHICLE
HONDA
Accord
Hybrid Push-to-Start (AT)
Program remote
starter option for
OEM REMOTE STAND
MANDATORY INSTALL
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
* HOOD
MUST BE INSTALLED IF THE VEHICLE CAN BE
PIN
REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
1 / 11
Page
PUSH
START
YEARS
2013-2017
Push-to-Start (AT)
2013-2017
BYPASS FIRMWARE VERSION
[
73. 30
ONLY - SEULEMENT
Program bypass option:
Program bypass option
(If equiped with OEM
Program bypass option
(Vehicle hybrid
FUNCTION
R.S.
:
ALONE
38
A11
REV.: 20201006
Vehicle functions supported in this diagram (functional if equipped) |
• • • • •
• • • • •
To add the firmware version and the options, use the
FLASH LINK UPDATER or FLASH LINK MOBILE tool,
]
UNIT OPTION
C1
D6
UNIT OPTION
OPTION UNITE
alarm):
D2
UNIT OPTION
OPTION UNITE
only):
D4
MODE
DESCRIPTION
Enable
Press 3x Lock to remote start with the OEM remote.
2
Notice: the installation of safety
elements are mandatory. The hood pin
SECURITY STICKER
OFF
and the sticker are essential security
NON
elements and must be installed.
WARNING
ATTENTION
Included
Guide # 95781
ADDENDUM - SUGGESTED WIRING
• • • • • • • •
• • • • • • • •
sold separately.
DESCRIPTION
OEM Remote status (Lock/Unlock)
monitoring
Push-to-Start
DESCRIPTION
Unlock before / Lock after (Disarm OEM
alarm)
DESCRIPTION
Hybrid mode (Vehicle hybrid only)
THIS MODULE MUST BE INSTALLED BY A
QUALIFIED TECHNICIAN. A WRONG
CONNECTION CAN CAUSE PERMANENT
DAMAGE TO THE VEHICLE.
CONFIGURATION
• • • •
• • • •