Thermaltake TH240 ARGB Sync Manual

Parts List

Intel Installation Guide

AMD Installation Guide

1. Tighten screw to the halfway.
   
3. Tighten screw again to ensure your waterblock is secure enough.
   

Installation Guide

ARGB Controller Installation Guide

1. Light Mode:
   Switch over between 7 LED modes.
   Rainbow → Full light → RGB Spectrum → Off → Flow → Radar → Pulse → Blink
2. Color Mode:
   When light mode is in Full Lighted, Pulse and Blink:
   Switch over 8 LED colors. Red → Yellow → Green → Teal → Blue → White → Purple → Rainbow
   When light mode is in Ripple:
   Switch over 7 LED colors.
   Red → Yellow → Green → Teal → Blue → White → Purple
   When light mode is in RGB Spectrum:
   Click to memorize and lock the color you want, click again to unlock the 256 colors auto rotation.
   When light mode is in Wave and Flow:
   LED color can not be adjusted.
3. Light Speed:
   Switch over between 4 light modes.
   Slow → Normal → Fast → Extreme

MB SYNC Installation Guide

Please power off the PC and check the Positive and Negative ends on the connector before connecting the cable to mainboard. Connecting the wrong end can damage the fans.

www.thermaltake.com