Sailrite HandyPress Instructions Manual page 13

Maintenance
• Frequently clean any dirt and debris left on the tool.
• Lubricate the main vertical shaft assembly periodically
with a dry lubricant or synthetic sewing machine oil to
prevent rust and maintain smooth operation.
• Periodically inspect the tool for damage.
• Frequently inspect alignment and wear level of parts.
Replace components if needed.
Replacement Parts (Sold Separately)
• HandyPress 75mm Round Upper Press Plate (#126434)
®
• HandyPress 5/16"-18 Thread Upper Adapter (#126435)
®
• HandyPress 9.5mm Post With O-Ring Upper Adapter for
®
Pres-N-Snap (#126436)
®
• HandyPress Washer 19 x 25 x 3mm (#126437)
®
• HandyPress 9.53mm (3/8") Lower Hole Adapter (#126438)
®
• HandyPress 15.87mm (5/8") Lower Hole Adapter (#126439)
®
• HandyPress Cutting Board (#126440)
®
• HandyPress Wear-Resistant Gasket (#126441)
®
• HandyPress 19mm (3/4") Hole Lower Spring Coil Insert (#126442)
®
• HandyPress Aluminum Front Cover With Logo (#126443)
®
• HandyPress Thumbscrew for Lower Adapter (#126444)
®
• HandyPress Thumbscrew for Main Vertical Shaft (#126445)
®
• HandyPress Thumbscrew for Sliding Workbench (#126446)
®
• HandyPress Replacement Handle Grip (#126447)
®
• HandyPress Sliding Flat Workbench (#126458)
®
• HandyPress 9.5mm Upper/Lower Adapter Post With O-Rings for Snapmaster™ (#126562)
®
Recommended Options (Sold Separately)
• HandyPress Rail System (#126351)
®
• HandyPress Sliding Backstop for Use With Lower Dies (#126448)
®
• HandyPress Ruler (#126459)
®
HandyPress Instructions
®
Denotes lubrication points.
| 11