Advertisement
To convert the 200W platform from 120V to 230V follow the steps below:
On the power supply confirm Q401 and Q402 are isolated from the heatsink.
1)
Confirm there is SILPAD/CERAMIC in between the heatsink and Q401 and Q402
and there should also be nylon washers going through
tab of devices.- See dwg. number S3S810132 on page 2 of 2.
The 2 jumper shunts must be in the two inner locations.
2)
Change the fuse on the front panel of the unit from 2A to 1A.
3)
200W PLATFORM
120V AC TO 230V AC
CONVERSION PROCEDURE
1
1
2
Page: 1 of 2
2
Advertisement
