1. Introduction The IXOLIFT adjustable work platform is a simple, safe and innovative alternative to ladders, step platforms and scaffolding. IXOLIFT is a power-free adjustable work platform. It requires no batteries, electricity or any external power source. IXOLIFT is designed for use on flat, level surfaces. It is designed to work in a very wide range of applications, from very clean environments in hospitals, food and beverage production facilities, pharmaceuticals and retail, to facility maintenance, commercial furniture, construction and industry.
2. Checks before use All railings must be firmly attached and undamaged. All rungs must be firmly fastened and free of dents and bends. Always keep clean for maximum grip. Check that the level is in the unit and working properly. All four caster wheels must be free of damage and rotating freely.
3. Technical specifications Maximum Working Height 3974 mm Safe Working Load (SWL) 150 kg Maximum Platform Height 1974 mm Minimum Platform Height 974 mm Platform size 526 mm x 556 mm Folded Height 1970 mm Folded Length 1198 mm Folded Width 728 mm Length with Stabilizers 1500 mm...
4. Functions Anti-slip automatic brakes Advanced lifting mechanism with gas shock absorber Lockable swivel casters Self-closing doors Tool tray compatible with Würth ORSY Box and cabinet system case 4.4.1. Max 40 kg on each side Non-slip floor Forklift Points Reinforced platform for ratchet straps Bubble level Raise the handle to secure the...
5. Instructions for use 1. Always read the Operating Manual ................................2. Check the condition of the unit – DO NOT USE a damaged unit 3. Apply brakes to the wheels ..................................4. Use only on firm, level surfaces 5. LEVEL the unit ALWAYS CHECK the bubble level ............................. 6.
6. Transport Transporting in Upright Position • Apply brakes to wheels. • Secure anti-skid brakes by raising platform to first locked position. Lift with forklift or slings as shown in section 8. Lifting points are clearly marked on base of unit. •...
8. Storage The IXOLIFT adjustable work platform must be stored indoors. Avoid storing the unit unused for long periods as this may damage the retainers, which could cause the gas spring to fail. If the unit has been stored for more than 3 months, move the basket up/down a couple of millimetres by going into the basket and out again a couple of times.
10. Tags ALWAYS READ THE OPERATING MANUAL ONLY FOR USE INDOORS CHECK THE CONDITION OF THE UNIT - NO DAMAGED USE UNIT BRAKE TIGHTEN ONLY ON HARD AND LEVEL USE SURFACES DON’T TRY TO GET UNIT TO MOVE, WHILE OPERATORS ARE ON THE PLATFORM IXO400-015W-2.0-DE-Würth_Edition IXO400-002...
Page 11
ALWAYS READ THE OPERATING MANUAL ONLY FOR USE INDOORS CHECK THE CONDITION OF THE UNIT - NO DAMAGED USE UNIT BRAKE TIGHTEN ONLY ON HARD AND LEVEL USE SURFACES DON’T TRY TO GET UNIT TO MOVE, WHILE OPERATORS IXO400-014 ARE ON THE PLATFORM IXO400-015W-2.0-DE-Würth_Edition IXO400-002 Document: IXOLIFT-400-015-2.0-DE-Würth_Edition...
12. EC Declaration of Conformity declare that the equipment described here is in compliance with the Machinery Directive 2006/42/EC. Harmonized standards used: EN 280:2013+A1:2015 except 5.6.2 (handrails). EN 131-7: 2013 (5.6 height of handrails, steps and doors). Maria Perez Valentin Casajuana Director of Products and Quality Purchasing Director Würth Spain, SA...
Need help?
Do you have a question about the 0962 400 230 and is the answer not in the manual?
Questions and answers