Page 1
All-in-one 29V950 Series REV. 02 Copyrightⓒ 2014 LG Electronics, Digital Mate Co., Ltd . All rights reserved. No part of this manual may be used, copied, reproduced, modified, distributed, displayed, stored in a retrieval system, or transmitted in any form by any Means (electronic, 2015.
Using LG Recovery Center Recovering from Boot Failure Backup and Restore Security Platform Data Symptom-to-part index Power system checkout LCD-related symptoms Indeterminate problems Removing and replacing a part (FRU) Part lists Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
The drive startup sequence in the computer you are servicing may have been changed. Be extremely careful during write operations such as copying, saving, or formatting. If you select an incorrect drive, data or programs can be overwritten. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Though the main batteries have low voltage, a shorted or grounded battery can produce enough current to burn personnel or combustible materials. WARNING Before removing any part (FRU), turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
3 Removing or installing main units Before you start to work on the machine, unplug the power cord. If you cannot unplug it, ask the customer to power-off the wall box that supplies power Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-LG features or options not covered by this inspection guide. If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem.
4 Check the power cord for : 5 Check for any obvious non-LG alterations. Use good judgment as to the safety of any non-LG alterations. 6 Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.
Emits visible and invisible laser radiation when open. Do not stare into the beam , do not view directly with optical instruments, and avoid direct exposure to the bean. Backup (Standby) RTC battery safety information When replacing or disposing of the backup (standby) RTC battery, note the following : Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Before you go to the checkout guide, be sure to read this section. IMPORTANT NOTE Only trained personnel certified by LG should service the computer. Read the entire FRU removal and replacement page before replacing any FRU. Use new nylon-coated screws when you replace FRUs.
Name of Each Part Name of Each Part Front View Built-in microphone Webcam Operation Status Lamps Pop-way HD Webcam Monitor / TV Power Indicator Jog Button Built-in speakers PC Power Lamp Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 11
Devices that are not authorized with USB 3.0 may not operate normally when connected to the USB 3.0 port. The fast charge USB port complies with USB specifications. This function may not work properly in products that do not comply with the USB specifications. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
In order to use Bluetooth 4.0, the device you want to connect to should support Bluetooth 4.0. Wireless LAN Intel®3160HMW Manufacturers and installers cannot provide services related to human safety as this wireless device may cause radio interference. Web Camera HD Web Camera Gigabit Ethernet Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
System information Product Weight Approx. 7.5 kg The weight may differ according to the model. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
The hot keys are only used in the PC mode. With the hot keys, you can use the PC more conveniently. To enable OSD Guide message to appear, install the OSD3 from [LG Update Center]. Then run [LG Control Center] > [System Settings] > [On Screen Display] tile.
Page 16
Off: The system is turned off or in Hibernates. Blinking: The system is in the sleep mode. You can select whether to use the Monitor / TV power lamp by configuring [Settings] > [General] > [Display Lamp]. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
To boot into DOS / EFI Shell, you must disable “Secure Boot option”. To boot from a USB device, use [F2] key to move the USB device to the top of the list in Boot menu after entering BIOS Setup, or press [F10] key to display Boot menu while the LG logo is being displayed, and the select a device you want to use.
Page 18
In Security, in “Secure Boot Configuration," Secure Boot values are right. (For details, refer to [Check Secure Boot].) It selects the :” Load Setup Defaults” on the “Exit” menu or [F9] Key and it summons a BIOS settings at initial value. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Upon the system rebooting, enter BIOS Setup again and check if Secure Boot has the values in the following figure. (Check UEFI Secure Boot, Protected Signatures, CertNames and Secure Boot Option.) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Downgrading from Windows 8 to Windows 7 (SecureBoot Disable) In Windows 8, select “Restart”. Once the system restarts and “LG” Logo appears, press [F2] key. The booting speed is faster than the existing models. You’d better press it as soon as the system restarts.
You can select which drive to search first to load the machine's operating system. Drag the device icon to change the boot order. Exit This menu can be set to an initial value or save your change. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 22
This shows the speed of CPU. System Memory Speed This shows the speed of the memory card. Total Memory This shows size of system memory. SATA 4 This shows SATA HDD information. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 23
System information System Date / Time Drag the Date or Time button to change the system date/time. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
When it is Off, the fan does not run at low temperatures. When it is On, the fan always runs. (Default: On) RTC WakeUp from S4 Set when you want to resume using the tool in hibernate mode. (ex : pwrtest.exe) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 25
(DEP: Technology examining memory additionally to prevent execution of malignant code in the system) Intel provide XD (eXecute Disable bit) that architecture is compatibility with DEP as a standard. Intell® Virtualization Technology Set Intel® Virtualization Technology. Intel® HT Technology Set Intel® HT Technology. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
[Protected Signatures] is Disable (Setup Mode) when the Enable (User Mode) can be a Reset. Delete All Secure Boot Keys [Protected Signatures] is Disable (Setup Mode) to create. (in this case, until the Reset to Default Disable Secure Boot is kept) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 27
System information Boot menu Edit Boot Order To change the booting order of the system, drag the decive icons up or down. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 28
This changes the parameters in the Setup menu to the factory default settings. When it is selected or [F9] key is pressed, the confirmation message appears. Click [Yes] to change the settings. Discard Changes This returns to the factory default settings for each parameter in the Setup menu. Save Changes Save change value. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
System information Using LG Recovery Center If the system has an error, you can use LG Recovery Center to use Windows 8 recovery function to recover or restore the system to its initial pre-pur- chase state. CAUTION LG Recovery Center uses the Windows 8 recovery function.
Page 30
When the following screen appears, select the USB flash drive and click [Next]. CAUTION This process deletes all the data on the storage device designated as a recovery drive. Make sure to back up its data in advance. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 31
Select [Delete the recovery partition] while creating a recovery drive to remove the recovery partition in the PC. Once the recovery partition is removed, you cannot use the recovery function of the PC. You can only recover the system using the recovery media. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
System information Recovering from Boot Failure If booting is impossible due to a serious error with the system, you can recover the system through LG Recovery Center RE. CAUTION If you have deleted the restoration data in the protected area of the hard disk, or have arbitrarily installed another operating system, the restore function may not work.
Page 33
For recovery, the power adapter must be connected. Connect the system power and then recover the system. When the factory reset has been completed as shown in the following figure, click the [Complete] button and then restart the system. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 34
If it is impossible to recover by using [F11], you can recover the system through a recovery drive. To recover by using a recovery drive, you must have the recovery drive made through LG Recovery Center [Create Recovery Drive]. Connect the recovery drive to the USB port of the PC.
PSD configuration settings are included in both automatically written Backup Archives and manually written Backup Archives. y PSD backup file (e.g. SpPSDBackup.fsb): A backup copy of the PSD image file may be created during a Security Platform User's manual backup. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 36
Please note that automatic backups are only executed if your PC is not shut down at the scheduled time.Please note that the user account chosen for the scheduled backup must be member of the group “Administrators” or “Backup Operators”. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 37
This button is disabled, if the Infineon Security Platform is disabled or not yet set up. Click here to create a backup authentication device. This feature is only available, if Enhanced Authentication is enabled. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
If the voltage is not correct, remove the power code form AC adapter. 10 seconds later, connect the power code, then measure the output voltage. If the voltage is not correct, change the AC adapter. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 39
To check the battery pack, do the following : Power off the PC. Remove the battery pack and measure the voltage between battery terminals 1(-) and 5(+). See the following figure : Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
LCD Assembly. LCD screen unreadable. System board. Wrong color displayed. Horizontal or vertical lines displayed LCD Assembly. on LCD Power-on indicator on, and a blank\LCD LCD Assembly. during POST. System board. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
If the problem remains, replace the following FRUs one at a time. (do not replace a non-defective FRU) a. LCD Assembly (Check external monitor whether the same problem recurs or not). b. Keyboard. c. Keydeck (TouchPad and Scroll Button Assembly). d. System board. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 42
As for the screw, every Torque 3 ± 0.2Kgfcm(0.196Nm) * The system hinge part apply to 2.5 ㎏fcm. For further information on Removing and Replacing a Part(FRU), refer to Explore view Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 43
When you detach or replace a component in the 29V950 model, prepare a pallet dedicated for the curved LCD. The stand base is secured with screws. Remove the screws by turning them counter-clockwise. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 44
Removing and replacing a part (FRU) Remove the Stand base. Remove the 2 screw. FRU No. Specification 1SZZBA4068C Screw, M2.5 X L5.0 Black(D4.5, H1.0t) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 45
The back cover of the stand is secured with hooks. Remove the cover by pushing the hooks on both sides in the direction of the arrows. If you cannot remove it with your hands, use a disassembly tool. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 46
Removing and replacing a part (FRU) Remove the Stand Back Cover. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 47
Removing and replacing a part (FRU) CAUTION Assemble the top part of the back cover first when you mount it so that the hooks are secured. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 48
The interface cable is secured with hooks. Press both hooks to separate the cable. The webcam cable and DC-Jack cable are each secured with a hook at the top. Press the hook to separate the cable. Webcam cable DC-jack Cable Interface Cable Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 49
Removing and replacing a part (FRU) Remove the 2 screw. FRU No. Specification FAB31626901 Screw, M4.0 X L7.0 Silver(D8.3, H2.5t) Remove the Stand. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 50
Removing and replacing a part (FRU) CAUTION Make sure that the jog part of the display does not touch the floor when moving or installing it. Otherwise, the jog button may be damaged. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 51
Screw 2 points and removing the Interface Cable, and then remove the HDD from the body Interface Cable FRU No. Specification 1SZZBA4068C Screw, M2.5 X L5.0 Black(D4.5, H1.0t) Remove the Interface Cable. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 52
Removing and replacing a part (FRU) Remove the 4 screws. FRU No. Specification 1SZZBA4011K Screw, M3.0 X L3.0 Silver(D4.8, H1.0t) Remove the HDD Bracket. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 53
Removing and replacing a part (FRU) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 54
Stand base(1010), b. Stand(1020), c. HDD & Interface Cable(1030) Disconnect the WLAN Cable, after removing the 10 screws. Cable FRU No. Specification 1SZZBA4068C Screw, M2.5 X L5.0 Black(D4.5, H1.0t) 10EA Remove the Memory Cover. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 55
When you remove the case, lift the triangular indent at the center of the stand as if you are lifting a lever. You need to pull out the antenna cable first to remove the case. Make sure that the fan area does not bend as it tends to bend easily. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 56
NOTE Antenna cable Black - Main / Antenna cable White - Aux FRU No. Specification Screw, M3.0 X L6.0 Gold(Tapping. D5.4, 1BPF0302018 H2.0t) Remove the Stand front cover with Stand frame. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 57
Removing and replacing a part (FRU) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 58
Make sure that the part connecting the fan with the main board does not bend when disconnecting the fan as it tends to bend easily. FRU No. Specification Screw, M3.0 X L6.0 Gold(Tapping. D5.4, 1BPF0302018 H2.0t) Remove the 2 Cable. Cable Cable Cable Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 59
Removing and replacing a part (FRU) Hold both sides of the middle cover and pull them apart to detach the main board. Remove the Middle cover. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 60
Removing and replacing a part (FRU) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 61
Stand base(1010), b. Stand(1020), c. HDD & Interface Cable(1030), d. Stand Front(1040), e. Middle Cover(1050) Remove the 2 screws. FRU No. Specification 1SZZBA4068C Screw, M2.5 X L5.0 Black(D4.5, H1.0t) Remove the DC-Jack Cable. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 62
Removing and replacing a part (FRU) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 63
Disconnect the fixed Screw 4 points, and then remove the Cable 1 points. NOTE The GM models are Screw / PM model separates the Screw 7 points. Cable Remove the FAN Assembly. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 64
Stand base(1010), b. Stand(1020), c. HDD & Interface Cable(1030), d. Stand Front(1040), e. Middle Cover(1050), f. DC-Jack Cable(1060), g. FAN Assembly(1070) Remove the 1 screws. FRU No. Specification 1SZZBA4068C Screw, M2.5 X L5.0 Black(D4.5, H1.0t) Remove the SSD. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 65
Stand base(1010), b. Stand(1020), c. HDD & Interface Cable(1030), d. Stand Front(1040), e. Middle Cover(1050), f. DC-Jack Cable(1060), g. FAN Assembly(1070), h. SSD(1080) Remove the 2 Hook. HOOK HOOK Remove the Memory. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 66
Stand base(1010), b. Stand(1020), c. HDD & Interface Cable(1030), d. Stand Front(1040), e. Middle Cover(1050), f. DC-Jack Cable(1060), g. FAN As- sembly(1070), h. SSD(1080), i. Memory(1090) Remove the 1 screws. FRU No. Specification 1SZZBA4068C Screw, M2.5 X L5.0 Black(D4.5, H1.0t) Remove the WLAN. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 67
Removing and replacing a part (FRU) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 68
Removing and replacing a part (FRU) 1110 Service USB Cap NOTE Remove the following parts in order before replacing this part. a. Stand base(1010), b. Stand(1020) Remove the Service USB Cap. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 69
Screw, M3.0 X L8 Black(D6.0, H1.75t) Screw, M3.0 X L6.0 Yellow(Tapping. D8, FAB30013616 H2.55 ) Insert a disassembly tool into the hook areas on both sides as shown below to remove them. HOOK Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 70
Separate the back cover of the display as shown in the figure. CAUTION Make sure that the cable is not pulled out or damaged by the disassembly tool when you remove the back cover of the display. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 71
Removing and replacing a part (FRU) Remove Display Back Cover with LCD Assembly. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 72
Remove the following parts in order before replacing this part. a. Stand base(1010), b. Stand(1020), c. Service USB Cap(1110), d. Display Back Cover(1120) Remove the 1 Cable. Speaker Cable Remove the Speaker Cable. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 73
Removing and replacing a part (FRU) Remove the Speaker. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 74
Stand base(1010), b. Stand(1020), c. Service USB Cap(1110), d. Display Back Cover(1120), e. Speaker(1130) Disconnect the Jog Assy, after removing the 2 screws. Jog cable FRU No. Specification Screw, M3.0 X L6.0 Gold(Tapping. D5.4, 1BPF0302018 H2.0t) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Fasten the screws at the top center first and then at the remaining area when you mount the cover. BLU cable FRU No. Specification FAB31339402 Screw, M3.0 x L4.5 Black(D8.1, H1.9t) 10EA Remove the BLU Cable. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 76
Removing and replacing a part (FRU) Remove the LCD Assembly. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 77
Stand base(1010), b. Stand(1020), c. Service USB Cap(1110), d. Display Back Cover(1120), e. peaker(1130), f. Jog(1140), g. LCD Assembly(1150) Remove the 2 Remove the LVDS Cable(LCD Cable). LVDS Cable(LCD Cable) LVDS Cable(LCD Cable) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 78
Stand base(1010), b. Stand(1020), c. Service USB Cap(1110), d. Display Back Cover(1120), e. e. peaker(1130), f. Jog(1140), g. LCD Assembly(1150), h. LCD Cable(1160) Remove the 6 screws. FRU No. Specification FAB31339402 Screw, M3.0 x L4.5 Black(D8.1, H1.9t) Remove the Rear Frame. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 79
Removing and replacing a part (FRU) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 80
Stand base(1010), b. Stand(1020), c. Service USB Cap(1110), d. Display Back Cover(1120), e. peaker(1130), f. Jog(1140), g. LCD Assembly(1150), h. LCD Cable(1160), i. Rear Frame(1170), Remove the 4 screws. FRU No. Specification FAB31626901 Screw, M4.0 X L7.0 Silver(D8.3, H2.5t) Remove the Hinge. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 81
Screw, M3.0 X L6.0 Yellow(Tapping. D8, FAB30013616 H2.55 ) Remove the MTV Board. NOTE Thermal pad is attached in Rear Frame to prevent the calorific when the coaxial cable is working. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 82
Remove the 4 screws CAUTION Make sure that the webcam is retracted when separating the back cover from it. FRU No. Specification Screw, M3.0 X L6.0 Gold(Tapping. D5.4, 1BPF0302018 H2.0t) Remove the Gasket. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 83
Connect the webcam cable by aligning the end with a white label with the end of the gasket as shown in the figure. If the webcam cable is not connected as shown in the guide, the cable may be too short and you may not be able to raise the webcam properly. Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Viva 29 Webcam DISPLAY Push-Push Rotation Web- Webcam NWEBC01 AFP74565007 cam module 29V950 with LID for Brazil NFAN01 EAL61620803 Fan module - PM Thermal Module NFAN01 EAL61620802 Fan module - GM Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 85
ID Label Brazil GM - 140W NLAB04 MEZ57758001 NT Energy Star Label Except Freedos NLAB05 MHK63545101 Energy waring, Only for Korea Free dos sku Limited Freedos NLAB06 MEZ65046202 SVC Label (White) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 86
LG P/N Description Remark NACC01 AFW72949001 Wireless mouse LITE ON NACC02 AFP73827101 Victory NANO SIZE USB RF DONGLE Accessory NACC03 AKB73715624 Remote control - 2D (KOREA) NACC04 EAD62043001 TV Antenna connection cable Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 88
NHEAD12 EBR80055601 Jog board Assembly NHEAD13 MDS64151801 Gasket, only sponge(30 x 25 x 5t) Viva 29 Webcam DISPLAY Push-Push Rotation We Webcam NWEBC01 AFP74565007 bcam module 29V950 with LID for Brazil Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 90
ID Label Brazil GM - 140W NLAB04 MEZ57758001 NT Energy Star Label Except Freedos NLAB05 MHK63545101 Energy waring, Only for Korea Free dos sku Limited Freedos NLAB06 MEZ65046202 SVC Label (White) Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 91
NFAN01 NMINI02 NMRY01 NMINI01 NMLB02 Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 92
MEMORY 4G DDR3L-1600MHz - Hynix Memory NMRY01 EAN62661602 MEMORY 4G DDR3L-1600MHz - SK hynix NMRY02 MGJ64423601 Shield Cover memory NFAN01 EAL61620803 Fan module - PM Thermal Module NFAN01 EAL61620802 Fan module - GM Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 93
NPWCD01 NADT01 NACC04 NKBD01 NACC01 NACC02 NACC03 Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Page 94
SVC Label (White) NACC01 AFW72949001 Wireless mouse LITE ON NACC02 AFP73827101 Victory NANO SIZE USB RF DONGLE Accessory NACC03 AKB73715624 Remote control - 2D (KOREA) NACC04 EAD62043001 TV Antenna connection cable Copyrightⓒ2014 LG Electronics Co., Ltd. LGE Internal Use Only...
Need help?
Do you have a question about the 29V950 Series and is the answer not in the manual?
Questions and answers