Related Manuals for Philips 4000 Series
Summary of Contents for Philips 4000 Series
- Page 1 Soundbar 4000 Series TAB4000 User manual Register your product and get support at www.philips.com/support...
-
Page 2: Table Of Contents
Contents 1 Important safety instructions Safety Care for your product Care of the environment Declaration of conformity Help and support 2 Your soundbar What’s in the box Main unit Connectors Remote control Prepare the remote control Placement Wall mount 3 Connect Connect to HDMI ARC Connect to power 4 Use your soundbar... -
Page 3: Important Safety Instructions
1 Important • Battery (battery pack or batteries installed) shall not be exposed to safety or the like. • Disconnect the product from the instructions power outlet before lightning storms. • When you disconnect the power cord, always pull the plug, never the cable. -
Page 4: Care For Your Product
Risk of overheating! Care for your product • Never install this product in a product. space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover Care of the environment the ventilation slots on the product. Battery usage CAUTION Disposal of your old product and •... -
Page 5: Declaration Of Conformity
This product complies with the radio Congratulations on your purchase, and interference requirements of the European community. from the support that Philips Hereby, TP Vision Europe B.V. declares that the product is in compliance with the www.philips.com/support. essential requirements and other relevant... -
Page 6: Main Unit
Soundbar’s LED indicator Power ④ Switch the playback source and the front indicator lights up accordingly. Adapter and plug type vary by regions. The indicator light on the front of the • Adapter model: PG241-1501600U main unit will show which mode is PG241-1501600I currently in use. -
Page 7: Remote Control
(Previous / Next) Remote control ⑤ Skip to the previous or next track in USB/ BT mode. This section includes an overview of the (Play / Pause) remote control. Start, pause or resume play in USB/ BT mode. VOL+ / VOL- (System volume) Increase /decrease system volume level. -
Page 8: Placement
• Do not place the remote control on a Replace the remote control battery wet object. • Do not place the remote control under Slide to remove the battery compartment direct sunlight or near sources of cover, insert 2 AAA batteries (1.5V) with excessive heat. -
Page 9: Wall Mount
Wall mount ~50mm/2.0" Note 640mm / 25.2” • Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. 3.0-3.5mm/0.12"-0.14" • Before wall mounting, make sure the wall can support the weight of your soundbar. •... -
Page 10: Connect
3 Connect Using a High Speed HDMI cable, connect the HDMI ARC connector on your soundbar to the HDMI ARC connector on the TV. This section helps you connect your soundbar to a TV and other devices, and then set it up. Note For information about the basic connections of your soundbar and... -
Page 11: Use Your Soundbar
Use your Select source soundbar Press the button repeatedly on the unit or press the USB,HDMI ARC, Pair/BT, buttons on the remote control This section helps you use the soundbar to to select the desired mode. play audio from connected devices. The indicator light on the soundbar will show which mode Before you start... -
Page 12: Adjust The Volume
Stadium (2 LEDs ON): Create an • Adjust the treble and bass atmosphere as if watching a sports volume game in a stadium. Press -Bass + Press -Bass + on the remote control to increase/decrease Bass's volume. BT Standby USB HDMI ARC Movie Bass Music... -
Page 13: Factory Reset
Bluetooth mode. On the Bluetooth device, switch on Bluetooth, search for and select Philips TAB4000 to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). will blink. Wait until you hear the voice prompt from the soundbar. -
Page 14: Usb Operation
• During play, if a call comes in, USB operation music play pauses. Play resumes when the call ends. Enjoy audio on a USB storage device, • If your Bluetooth device supports memory, etc. control you can press Insert the USB device. pause/resume play. -
Page 15: Hdmi Arc Operation
5 Product HDMI ARC operation Ensure that the unit is connected to the TV or audio device. 1 Press the button repeatedly on Note the unit or press HDMI ARC buttons on the remote to select the desired change without notice. mode. -
Page 16: Troubleshooting
If you have problems using this product, HDMI ARC check the following points before you • PCM 2ch request service. If you still have a problem, get support at www.philips.com/support. BLUETOOTH • Main unit The buttons on the main unit do not •... - Page 17 • Reset this product to its factory settings Remote control does not work. (see "Factory reset") • Before you press any playback control Distorted sound or echo. • Reduce the distance between the • If you play audio from TV through this remote control and the unit.
-
Page 18: Trademarks
7 Trademarks ® The terms HDMI, HDMI High-De�nition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. - Page 19 TAB4000/10_UM _V1.0...
Need help?
Do you have a question about the 4000 Series and is the answer not in the manual?
Questions and answers