Page 1
AJ10 Installation Guide P/N:8504142 Rev: A Date of Issue: 2025-02-20...
Page 2
AJ10 Installation Guide Copyright ADS makes no warranty of any kind with respect to this material, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. ADS shall not be liable for any errors contained herein or any...
All the electrical components and their connections should be installed by an authorized technician. • Only ADS-certified fuses, accessories, and spare parts can be installed on the chair. • This device should not operate in the environment of high temperature, high humidity, vibration flammability, unbalance, or dusty.
AJ10 Installation Guide 4.3 Installation Requirements Unit : inches 137.8 26.8 Note: The dimensions listed above are the minimum requirements. 5 Packaging Note: This product is packed in separate parts, and total of four boxes. There is a packaging list attached inside.
AJ10 Installation Guide 6 Installation 6.1 Place the Chair 1. Remove all objects and cardboard from around the dental chair. 2. Remove binding belt and backrest and upholstery packing. 3. Inspect dental chairs and accessories for damage and check that all accessories are complete according to the list of accessories.
AJ10 Installation Guide 6.2 Fix the Chair Attentions: 1.The chair must be fixed on the floor for ensuring stability, for it can be seriously damaged by wrong fixation. 2.Check out the material of the floor on the installing place. Please contact the authorized contractor to thickening the floor if its thickness is less than 82 mm.
Page 11
AJ10 Installation Guide 2. Place the key holes in the backrest upholstery over the fastener posts on the back upholstery armature. Push down until the backrest upholstery inserts into place. 3. Insert the glide bar into the slot at the top of the backrest upholstery. Push it down into...
AJ10 Installation Guide 6.4 Install the Seat Upholstery Put the upholstery onto the chair frame, lock the bracket and the rear end of the chair frame together, and tighten the front end of the chair frame with 2 M6*16 screws.
Page 16
We reserve the right to make any alteration which may be due to technical improvements. ADS Dental System Inc. Add: 1590 S Milliken Ave., unit A, Ontario, CA 91761 Tel: (626) 620 0456 E-mail: sales@adsequip.com www.adsdental.com...
Need help?
Do you have a question about the AJ10 and is the answer not in the manual?
Questions and answers