VonHaus 2515205 Manual

Advertisement

2515205
Please read all instructions carefully before use and
retain for future reference.
CAUTION Do not immerse in water.
Protect your ears.
Wear a dust mask.
Protect your eyes.
Protect your hands.
A5P | 01
Please read all instructions carefully before use and retain
for future reference.
INTENDED USE Only operate the power tool/machine
for its intended purpose and within the parameters
specified in this manual.
This power tool/machine is for domestic use only. This
power tool/machine is not intended for use by
persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
supervised or given appropriate instruction concerning
the product's use by a person responsible for their safety.
GENERAL PRECAUTION Do not allow to be used as a
toy. Children should be supervised to ensure they do not
play with the power tool/machine.
If the power tool/machine is not functioning properly,
has been dropped, damaged, left outdoors, or immersed
in liquid, do not use, contact DOMU Brands Customer
Services.
Do not use the power tool/machine if any parts appear to
be faulty, missing or damaged.
Ensure all parts are securely attached before use.
RISK OF PERSONAL INJUR Y Avoid body contact with
earthed or grounded surfaces such as pipes,radiators,
ranges and refrigerators. There is an increased risk of
electric shock if your
body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the
off position before connecting to the power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch, or energising
power tools that are switched on, invites accidents.
Do not operate power tools in explosive atmospheres
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
Always wear eye protection. Any power tool can throw
foreign objects into your eyes and cause permanent
eye damage. Always wear safety goggles (not glasses)
that comply with ANSI safety standard Z87.1. Every day
glasses have only impact resistant lenses.
Do not expose power tools to rain or wet conditions.
Water entering the power tools will increase the risk of
electric shock.
Stay alert, watch what you are doing and use common
sense when operating a power tool/machine. Do not use
a power tool/machine while you are tired or under the
influence of drugs, alcohol or medication. A moment of
inattention while operating power tool/machine may re-
sult in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or
battery pack, picking up or carrying the tool.
Carrying power tool/machine with your finger on the
switch or energizing power tool/machine that have the
switch on invites accidents.
Remove any adjusting key or spanner before turning the
power tool/machine on. A spanner or a key left attached
to a rotating part of the power tool/machine may result in

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2515205 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for VonHaus 2515205

  • Page 1 2515205 Please read all instructions carefully before use and retain for future reference. INTENDED USE Only operate the power tool/machine for its intended purpose and within the parameters Please read all instructions carefully before use and specified in this manual.
  • Page 2: Technical Specification

    personal injury. Keep cutting tools sharp and clean. Properly maintained Do not overreach. Keep proper footing and balance at cutting tools with sharp cutting edges are less likely to all times. This enables better control of the power tool/ bind and are easier to control. machine in unexpected situations.
  • Page 3: Declaration Of Conformity

    DOMU Brands Ltd Unit 30, Finlan Road Stakehill Industrial Estate Middleton, Manchester M24 2R W Declare under our sole responsibility the product: 2515205 Description 450W Hedge T rimmer Complies with the essential requirements of the following directives: 2006/42/EC 2000/14/EC 2014/30/EU...
  • Page 4: Specification

    SPECIFICA TION 1. Blade Safety Cover (not shown) 2. Dual Action Cutting Blades 3. Safety Protection Guard 4. Front Handle with ON/OFF Trigger 5. Rear Handle with ON/OFF Trigger 6. Cable Holder 7. Power Cable A5P | 01...
  • Page 5: Operation

    CONNECTION This Hedge Trimmer may only be connected to a single phase AC current. Ensure that the mains voltage is the same as the operating voltage indicated on the rating plate. Form a loop in the power cable and push it through the opening in the rear of the Handle (5) and hook it over the Cable Holder (6).
  • Page 6: Working Position

    WORKING POSITION Maintain proper footing and balance and be careful not Always hold the Hedge Trimmer with one hand on the Front to overreach. Handle (4) and one hand on the Rear Handle (5). Always wear safety goggles, non-slip footwear and CAUTION: Never hold the tool by the Safety Protection rubber gloves when using the Hedge Trimmer.
  • Page 7: Troubleshooting

    TROUBLESHOOTING Pr oblem Solution Tool does not power on. Check that the plug is connected correctly. The Blades may be blocked. Power off and remove the blockage. Blades do not move. The Blades may have siezed. Contact DOMU Brands Customer Services. The Blades may be damaged.
  • Page 8: Vielen Dank

    .vonhaus.com/warranty support@domu.co.uk purchase receipt or statement as proof of the purchase VonHaus es una marca registrada de DOMU Brands Ltd. date. The warranty only applies if the product is used Hecha en China para DOMU Brands. Unit 30, Stakehill solely in the manner indicated in the warnings page of Industrial Estate, Middleton, Manchester M24 2RW.

Table of Contents