Bellucci Aroma Instruction Manual page 2

Table of Contents

Advertisement

plug in water or other liquids.
05. Remove plug from wall outlet before cleaning and when not in use. Allow
appliance to cool down completely before taking off or attaching
components or before cleaning.
06. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or is dropped or damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repairs
or adjustments.
07. The use of accessory attachments not recommended by the appliance
manufacturer may result in fire, electric shock, or injury.
08. Place appliance on a flat surface or table, do not hang power cord over the
edge of table or counter.
09. Ensure the power cord does not touch the hot surface of the appliance.
10.Do not place the coffee maker on a hot surface or beside an open flame.
11.To disconnect, turn to "off", then remove the plug from wall outlet.
Always hold the plug. But never pull the cord.
12.Do not use appliance for other than intended use.
13.Close supervision is necessary when appliance is being used by or near
children.
14.Be careful not to get burned by the steam.
15.Do not touch any hot surface of the appliance (including the steam
wand, and the steel mesh). Use handle or knobs.
16.Do not let the coffee maker operate without water.
17.Scalding may occur if the water tank is removed during the brewing.
cycle.
18.Do not remove the filter holder when in use or when steam or hot water
escape from the holder.
19.Release pressure through the steam wand before removing water tank
cover or filter holder.
20.This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Aroma and is the answer not in the manual?

Table of Contents