Cleaning Washer Jets - Tesla MODEL Y 2025+ Owner's Manual

Windshield Wiper Blades, Jets and Fluid
To replace the wiper blades:
1. Shift into Park and turn off the wipers.
2. Touch Controls > Service > Wiper Service Mode to move
the wipers to the service position.
3. Lift the wiper arm a short distance away from the
windshield, just far enough to access the wiper blade.
CAUTION: Wiper blades do not lock into a lifted
position. Do not lift a wiper arm beyond its intended
position.
4. Place a towel between the wiper arm and windshield to
avoid scratching or cracking the windshield.
5. Hold the wiper arm and press the locking tab while sliding
the blade away from the arm.
6. Align the new wiper blade on the wiper arm and slide it
toward the end of the wiper arm until it locks into place.
CAUTION: Ensure the new blade is locked in place
and does not move. Perform a push-pull test to
confirm. If not locked in place (you can hear and
feel a "click"), the wiper blade may come off during
use, resulting in serious damage.
7. Turn Wiper Service Mode off to return the wipers to their
normal position.

Cleaning Washer Jets

If a windshield washer jet becomes blocked, use a thin strand
of wire to clear any blockages from the nozzles.
184
WARNING: Do not operate the washers while cleaning
Model Y. Windshield washer fluid can irritate eyes and
skin. Read and observe the washer fluid manufacturer's
instructions.
MODEL Y Owner's Manual