Breville INSTANT CAPPUCCINO CM8 Instructions For Use Manual page 5

Table of Contents

Advertisement

Breville IC Instructions
13/11/06
CLEANING CONTINUED
6. Place the cleaning jug under the
cappuccino nozzle. (figure D)
7. Empty any remaining milk from the milk tank
and add clean water up to the 4 cup mark.
Place on the unit ensuring the tank is
pushed fully back on the unit.
8. To start cleaning turn the control dial
anticlockwise to the CLEAN/GO! setting.
(figure E)
9. Clean water is flushed through the machine
into the cleaning jug.
10. When all of the water from the milk tank has
flushed through, turn the control dial
clockwise to the STOP position. A small
amount of water will continue to be
dispensed. (figure F)
D
4:29 pm
Page 9
11. Remove and empty the cleaning jug.
Your Instant Cappuccino is now clean.
If you want to empty the water tank please
follow the steam release procedure.
NOTE:
If the machine has not been used for a long
time, or it is excessively dirty, we recommend
that bicarbonate of soda is mixed with the
water at step 7 to assist the cleaning process.
If bicarbonate of soda has been used, flush
the system again with clean water to remove
any residue.
STOP
CLEAN/GO
E
STOP
CLEAN/GO
F
8
STEAM RELEASE PROCEDURE
IMPORTANT:
Never remove the water tank cap while the machine is switched on and without first performing the
steam release procedure. Large amounts of steam will be released which can cause burns.
If you are at all concerned about performing the steam release procedure switch the machine off and
wait for it to cool completely.
A
A
B
COFFEE
SHOT
C
STOP
CLEANING TRAY
CLEAN/GO
COFFEE
SHOT
CLEANING TRAY
1. Switch the machine off by pressing the
power on/off button. (figure A)
2. Switch off at the mains supply and remove
the plug from the mains socket.
3. Remove the milk tank from the machine.
(figure B)
4. Turn the control dial to CLEAN/GO! The
pressurized steam will be released from the
nozzle. There will be a large amount of
steam that will continue to be released for a
minute or so.
(figure C)
5. When the steam release has finished very
carefully remove the water tank cap - there
may still be a small amount of steam left in
the water tank so loosen the cap slowly and
let any steam escape before removing
completely. (figure D)
6. Return control dial to the STOP position
D
COFFEE
SHOT
9
CLEANING TRAY

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents