Advertisement
Quick Links
PUDU CC1
Daily maintenance
of cleaning robot
Maintaining the intelligent cleaning robot is beneficial to extend the life of the machine
and make it perform better.
The following describes the daily maintenance methods of robot.
1. Clean the sensor and the bottom of the body
the sensor is equivalent to the robot's eyes. If it is obscured by dust，the cleaning process will be affected.
Cleaning method:
Period:
regular 3~5 weeks
2. Clean up dust box, water filter box, garbage box, air filter sponge
the accumulation of garbage and dust will
cause bacteria and affect the cleaning effect.
Cleaning method:
garbage box: Use a brush to clean up garbage
water filter box: it can be washed with water
dust box: clean the dust and pat it gently. Do
not flush it. Keep it dry.
Air filter sponge: Pat it gently at ordinary times.
Replace it directly if it is too dirty. It is not
recommended to wash it with water.
Period:
clean up every 2 days or once or more
on the same day according to the degree of
dirt secondary cleanup
wipe with a soft and clean cloth
Sensor Position Indication
garbage box
water filter box
air filter sponge
dust box
Advertisement
Related Manuals for Pudu CC1
Summary of Contents for Pudu CC1
- Page 1 PUDU CC1 Daily maintenance of cleaning robot Maintaining the intelligent cleaning robot is beneficial to extend the life of the machine and make it perform better. The following describes the daily maintenance methods of robot. 1. Clean the sensor and the bottom of the body the sensor is equivalent to the robot's eyes.
- Page 2 3. Clean up the Sweeping brush and Scrubbing Brush During the working process, the side brush and roller brush will be wrapped with hair and fine fabric, etc. If it is not cleaned for a long time, the cleaning effect will be affected, and even the service life of the motor will be affected.
- Page 3 6. Clean the drain assembly of the roller brush plate (drain hole) long-term accumulation of sludge and dirt on the rolling brush plate will affect the draining effect floor cleaning effect Cleaning method: robot after draining clean water and sewage to make it fall backward, use a steel brush to clean the small hole of the rolling brush plate, and use a brush to roll brush the plate for...
Need help?
Do you have a question about the CC1 and is the answer not in the manual?
Questions and answers