MikroTik CRS304-4XG-IN User Manual

15/10/2024, 11:27
3 0 4 - 4 X -
CRS304-4XG-IN
This is a compact and powerful device designed to simplify your 10 Gigabit network setups. It comes equipped with
4x10G Ethernet ports that are ready to use right out of the box.
Safety Warnings
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with
standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original
packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is
responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes.
Do not attempt to disassemble, repair, or modify the device. If service is needed, please contact MikroTik support.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this
product with care and operate at your own risk!
The socket-outlet shall be installed near the equipment and shall be easily accessible.
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power
adapter from the power outlet.
To avoid contamination of the environment, separate the device from household waste and dispose of it in a safe manner,
for example, in designated areas. Become familiar with procedures for properly transporting the equipment to designated
collection points in your area
Quick start
Connect with your computer to the device;
Connect the device to a power source (see Powering);
Configuration should be made using a web browser WebFig or the WinBox configuration tool https://mt.lv/WinBox;
Open http://192.168.88.1
using the MAC address. The username is "admin," and there is no password (or, for some models, check user and
wireless passwords on the sticker);
Click the "Check for updates" button and update RouterOS to the latest version;
For a manual update, visit the products page at
packages are accessible under the "Support&Downloads" menu;
Upload downloaded packages to the WinBox "Files" menu and reboot the device;
https://help.mikrotik.com/docs/display/UM/CRS304-4XG-IN
CRS304-4XG-IN - User manuals - MikroTik Documentation
in a web browser to start setup. If the IP address is unavailable, use WinBox and connect
https://mikrotik.com/products to find your product. The required
1/4