MikroTik CCR2216-1G-12XS-2XQ Quick Start Manual

EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v7.11.2 or the latest version to ensure compliance with local authority regulations!
It is the end user's responsibility to follow local country regulations. All MikroTik devices must be professionally installed.
This Quick Guide covers the model: CCR2216-1G-12XS-2XQ.
This is a network device. You can find the product model name on the case label (ID).
Please visit the user manual page on
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Technical specifications, Full EU Declaration of Conformity, brochures, and more info about products at
Configuration manual for software in your language with additional information can be found
MikroTik devices are for professional use. If you do not have qualifications please seek a
First steps:
Connect your PC to the Ethernet1 port;
Connect the device to a power source;
Configure the IP settings of your network card to 192.168.88.2/24;
Configuration should be made using Webfig in a web browser or the WinBox configuration tool
Open http://192.168.88.1 in a web browser to start setup. If the IP address is unavailable, use Winbox and choose the "Neighbors" tab to find the device.
Proceed to connect using the MAC address. The username is "admin", and there is no password (or, for some models, check user and wireless passwords on
the sticker);
For a manual update, visit the products page at
"Support&Downloads" menu;
Upload downloaded packages to the Webfig or Winbox "Files" menu and reboot the device;
By upgrading your RouterOS software to the latest version, you can ensure optimal performance, stability, and security updates;
Set up your router password.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the
Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own
risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
Adapter shall be installed near the equipment and shall be easily accessible.
To avoid contamination of the environment, separate the device from household waste and dispose of it in a safe manner, for example, in designated areas.
Become familiar with procedures for properly transporting the equipment to designated collection points in your area.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures
Electric shock hazard. This equipment is to be serviced by trained personnel only
Manufacturer: Mikrotikls SIA, Unijas iela 2, Riga, Latvia, LV1039.
BG - Български. Бързо ръководство
https://mt.lv/um for the full up-to-date user manual. Or scan the QR code with your mobile phone.
https://mikrotik.com/products
https://mikrotik.com/products
at https://mt.lv/help
consultant https://mikrotik.com/consultants
https://mt.lv/winbox
to find your product. The required packages are accessible under the
;