Download Print this page

Care And Cleaning - Breville BKE820 Instructions & Recipe Inspirations

Professional 800 collection variable temperature kettle
Hide thumbs Also See for BKE820:

Advertisement

Care and Cleaning

BKE820_KETTLE_FA.indd 15-16
CARE AND ClEANING
Always switch off at the power outlet and unplug
Alternatively:
the appliance from the power outlet before
1.
Fill the kettle until two-thirds full with 1 part
cleaning.
vinegar and 2 parts water. Boil and allow to
Removable filter
stand overnight.
2.
Empty the solution from the kettle. Fill the
The Breville Professional 800 Collection
®
Variable
Temperature Kettle features a removable mesh
kettle with clean water, bring to boil and
filter to remove scale deposits for cleaner water.
discard the water. Repeat and the kettle will
be ready for use.
To clean the scale deposits from the filter,
remove the filter by opening the lid and sliding
the filter up and out of the kettle.
to clean the exterior
The filter can be cleaned by placing under
The outside of the kettle should be wiped with a
running hot water and rubbing with a cleaning
damp cloth then polished with a soft, dry cloth.
cloth or brush. To replace the filter, simply slide
the filter down into the slot behind the spout of
the kettle and push back into position.
Removal of mineral deposits
Note: the filter could become damaged
Mineral deposits in tap water may cause the
with time, so please check regularly and
kettle interior and water window to discolour
replace if found damaged.
over time. Mineral deposits may be removed by
using a proprietary kettle descaler available from
most leading supermarkets, department stores
and hardware stores.
Note: Do not use chemicals, steel wool,
or abrasive cleaners to clean the inside
or outside of the kettle.
wARNING: to PREVENt DAMAGE to
tHE APPlIANCE, Do Not
USE AlKAlINE ClEANING
AGENtS wHEN ClEANING.
USE A SoFt ClotH AND
MIlD DEtERGENt.
wARNING: Do Not REMoVE tHE
DIFFUSER RING loCAtED
oN tHE BASE INSIDE tHE
KEttlE.
wARNING: NEVER IMMERSE tHE
KEttlE BASE, PowER BASE,
PowER CoRD oR PowER
PlUG IN wAtER, oR Allow
MoIStURE to CoME IN
CoNtACt wItH tHESE
PARtS.
Storage
Ensure the kettle is switched off, cleaned and
dried before storing. Ensure that the lid is closed
and locked securely into place. Wrap the power
cord around the power cord storage under the
power base. Stand the kettle upright on the
power base. Do not store anything on top.
1
3/6/08 11:34:39 AM

Advertisement

loading