1. Manuals
  2. Brands
  3. Degelman Manuals
  4. Spreader
  5. M28
  6. Operator's & parts manual

Degelman Manure Spreader M28 Operator's & Parts Manual

Hide thumbs Also See for Manure Spreader M28:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR & PARTS
MANUAL
142967 v1.9
MANURE SPREADER
D E G E L M A N
I N D U S T R I E S
L P
B O X
8 3 0 - 2 7 2
I N D U S T R I A L
D R I V E ,
M28 / M34
R E G I N A ,
S K ,
C A N A D A ,
S 4 P
3 B 1
F A X 3 0 6 . 5 4 3 . 2 1 4 0
P H 3 0 6 . 5 4 3 . 4 4 4 7
Serial Numbers above 1071
1 . 8 0 0 . 6 6 7 . 3 5 4 5
D E G E L M A N . C O M

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Manure Spreader M28 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Degelman Manure Spreader M28

Summary of Contents for Degelman Manure Spreader M28

  • Page 1 OPERATOR & PARTS MANUAL 142967 v1.9 MANURE SPREADER D E G E L M A N I N D U S T R I E S B O X 8 3 0 - 2 7 2 I N D U S T R I A L D R I V E , M28 / M34 R E G I N A ,...
  • Page 3 QUICK-START GUIDE WARRANTY MANURE SPREADER REMEMBER! You must complete Product * Refer to operators manual for complete safety and operation info. Registration to be eligible for Warranty. Hook-up to Manure Spreader NOTE: Stop the tractor engine, place all controls in neutral, set park brake before dismounting. 1.
  • Page 4 Unloading/Operating the Manure Spreader IMPORTANT: For customers with John Deere tractors, to reduce the risk of damaging your M28/34 driveline clutches, please contact your local JD Dealer regarding PTO calibration and Soft Start settings on tractor. 1. Start up the rear beaters (PTO) and bring up to speed. 2.

  • Page 5: Table Of Contents

    * Reference Sheet Quick-Start Guide OPERATORS SECTION - TABLE OF CONTENTS Introduction Overview Safety Preparation Hook-Up / Unhooking Tractor & Spreader Preparation Operation Operation Safety & Preparation Loading / Unloading Freezing Weather Operation Optional - Material Trailer Use Transporting & Storage Service &...

  • Page 6: Introduction

    If you follow the instructions given in this manual, your machine will work well for many years. Safe, efficient and trouble free operation of your Degelman Spreader requires that you and anyone else who will be operating or maintaining the Spreader, read and understand the Safety, Operation, Maintenance and Troubleshooting information contained within this Manual.

  • Page 7: Overview

    Overview TO THE NEW OPERATOR OR OWNER PRINCIPLES OF OPERATION The Degelman M28 & M34 Manure Spreaders The Manure Spreader consists of a smooth walled are designed to efficiently and uniformly spread material trailer with a floor chain drag system that manure in widths of up to 60 feet in fields.

  • Page 8: Safety

    Safety Why is SAFETY important to YOU? 3 BIG Reasons: •Accidents Can Disable and Kill •Accidents Are Costly •Accidents Can Be Avoided SAFETY ALERT SYMBOL The Safety Alert Symbol means: he Safety Alert Symbol identifies important safety messages applied to the Manure Spreader and in ATTENTION! this manual.

  • Page 9: General Safety

    GENERAL SAFETY YOU are responsible for the safe operation and 1. Read and understand the Operator’s maintenance of your Degelman Manure Spreader. Manual and all safety signs before YOU must ensure that you and anyone else who operating, maintaining or adjusting is going to operate, maintain or work around the Manure Spreader.

  • Page 10: Preparation

    Preparation HOOK-UP / UNHOOKING The Manure Spreader should always be parked on 10. Connect the Electrical Light plug. a level, dry area that is free of debris and foreign 11. Connect the hydraulics. To connect, proceed as objects. Follow this procedure when attaching: follows: 1.

  • Page 11: Tractor & Spreader Preparation

    Preparation TRACTOR PREPARATION SPREADER PREPARATION Although there are no operational restrictions on the Follow this procedure when selecting and preparing Manure Spreader when it is new, there are some a tractor for use with the machine: mechanical checks that must be done to ensure the long term integrity of the unit.

  • Page 12: Operation

    Operation OPERATING SAFETY PRE-OPERATION CHECKLIST It is important for both personal safety and 1. Read and understand the Operator’s Manual maintaining the good mechanical condition of and all safety signs before using. the machine that this pre-operational checklist 2. Stop tractor engine, place all controls in neutral, be followed.

  • Page 13: Loading / Unloading

    Operation LOADING UNLOADING CONTINUED... 2. Fully Open Rear Gate - Fully extend the cylinders so : When p IMPORTANT arking the spreader for the gate is fully open all the way to the top. loading, put the tractor in PARK or NEUTRAL and apply the parking brake.

  • Page 14: Freezing Weather Operation

    Operation OPTIONAL MATERIAL TRAILER USAGE WARNING Stop tractor engine, place all controls in neutral, set park brake, remove ignition key and This manure spreader may also be used as a wait for all moving parts to stop before servicing, material trailer by removing the rear beater/frame cleaning, adjusting, repairing or unplugging.

  • Page 15: Transporting & Storage

    Transporting & Storage TRANSPORT SAFETY STORAGE SAFETY • Read and understand ALL the information in the • Store unit in an area away from human activity. Operator’s Manual regarding procedures and • Do not permit children to play around the SAFETY when operating the spreader in the stored unit.

  • Page 16: Service & Maintenance

    Service & Maintenance HARDWARE SPECIFICATIONS HYDRAULIC SAFETY Note: Unless stated otherwise, hardware is typically: • Make sure that all components in the hydraulic Hex, Plated GR5 UNC or P8.8 (metric) system are kept in good condition and are clean. • Replace any worn, cut, abraded, fl attened or TORQUE SPECIFICATIONS crimped hoses and metal lines.

  • Page 17: Hydraulic Fitting Installation

    Service & Maintenance HYDRAULIC FITTING INSTALLATION Note: A DASH size refers to a diameter of a hose (inside) or of a tube (outside) measured in 1/16” increments. The following info is to help you identify and properly For example, a Hose specifi ed as dash 8 or -8 would install some of our standard hydraulic fi...

  • Page 18: Maintenance Safety

    4. If fittings will not take grease, remove and clean thoroughly. Also clean lubricant passageway. Product Decals Replace fitting if necessary. 143204 Decal, Degelman - 11” x 48-3/16" 143288 Decal, M28 5. Inject grease until you see grease being expelled 143277 Decal, M34 from the bearing or bushing areas.

  • Page 19: Service Intervals

    Service & Maintenance LUBE AFTER EVERY 8 HRS. SERVICE INTERVALS Initial & after every 8 Hrs. CAUTION Machine may be shown with check for hydraulic fluid leaks guard(s) opened for illustrative purposes only. Close all guards before using. and damaged hoses check tire pressure (65 psi) / (58 psi) Optional Tires...

  • Page 20: General Maintenance

    Service & Maintenance DRIVELINE REMOVAL - CUT-OUT CLUTCH WARNING Stop tractor engine, place all controls in neutral, set park brake, remove ignition key and The front center driveline wait for all moving parts to stop before servicing, is secured onto the adjusting, repairing or unplugging.

  • Page 21: Drag Chain

    Service & Maintenance DRAG CHAIN REPLACING A DRAG CHAIN SLAT 1. Occasionally check the Drag Chain for any bent or damaged slats. It is important to straighten or replace any damaged slats immediately. 2. The drag chain tension should be checked and Front Front Conveyor...

  • Page 22: Tire Safety

    Service & Maintenance WHEEL HUB REPAIR WHEEL NUT & WHEEL BOLT TORQUE TORQUE BOLT PATTERNS IMPORTANT Be sure DISASSEMBLY to block up unit securely before removing tires. 1. Remove dust cap. COMMON 2. Remove cotter pin from nut. HUB & SPINDLE 5 BOLT PATTERN 6 BOLT PATTERN 8 BOLT PATTERN...

  • Page 23: Removal Instructions

    Service & Maintenance SPHERICAL BEARING INSTALLATION SPHERICAL BEARING COMPONENTS 117195 - Bearing Housing, c/w Retaining Rings 117196 - Bearing 117197 - Bearing Adapter Sleeve, c/w Lock Nut and Lock Washer 117198 Retaining Ring Adapter Sleeve. Lock Nut Lock Washer Snap Ring Bearing Snap Ring (Note: Do NOT grease spherical bearings)
  • Page 24 Service & Maintenance HYDRAULIC CYLINDER REPAIR 5. Take the plastic removal ring from the seal kit: PREPARATION Types of Cylinders a) Straighten the ring and remove any kinks or When cylinder repair (Wire Ring / Threaded Head) excessive curl to make installation easier and is required, clean off prevent it from falling out.

  • Page 25: Torque Value

    Service & Maintenance 8. Remove locknut, piston and head from rod. 11. b) Tighten the band clamp to ensure the wire ring is fully seated. Then, loosen the clamp Piston Seal (2pcs) approx. 1/2 a turn to allow band clamp to slide Wear Ring during fi...
  • Page 26 Service & Maintenance REPAIRING A THREADED HEAD CYLINDER REPAIRING A THREADED HEAD CYLINDER Set Screw Style Locking Ring Style Barrel Barrel Set Screw Locking Gland Ring Lock Piston U-Cup Wear Dual Seal Seal Piston Ring O-Rings Seal Wiper Piston Seals Seal (Style may vary, Lock...

  • Page 27: Troubleshooting

    Troubleshooting TROUBLESHOOTING In the following section, we have listed some of the problems, causes and solutions that you may encounter. If you encounter a problem that is difficult to solve, even after having read through this troubleshooting section, please call your local dealer or distributor. Before you call, have this manual and the serial number from your unit ready.

  • Page 28: Parts Section - Table Of Contents

    Parts Section PARTS SECTION - TABLE OF CONTENTS IMPORTANT: Overview Frame Components Walking Axle & Wheel Components READ MANUAL Hitch Pole Components Rear Gate Components Front Shield Components Chain & Tightener Components Rear Axle & Gearbox Components Rear Frame & Beater Components Rear Beater Gearbox Components Driveline Components Hydraulic Routing...
  • Page 29 Frame Components FRAME COMPONENTS 143204 - Decal, 142658 - Decal, Keep Back 500ft (2) Degelman (2) 143288 - Decal, M28 (2) or 143277 - Decal, M34 (2) 502026 - Bushing (2) 142556 - Decal, Reflector Amber - 2 x 9 (6)
  • Page 30 Walking Axle & Wheel Components WALKING AXLE COMPONENTS - STANDARD 246391 - Threaded rod Assembly (1) 246735 - Plug Assembly (1) 246725 - Walking Wheel Assembly (2) 246734 - Disc, Wear-Nylon (2) 131206 - Flat Washer, 1-1/4 (1) 118445 - Lock nut, 1-1/4 (1) 246735 - Plug Assembly (1) WHEEL COMPONENTS - STANDARD...
  • Page 31 Walking Axle & Wheel Components OPTION - LARGER WHEEL/AXLE PACKAGE Note: Larger wheel option replaces the walking axles and tires only. All other items are the same as the standard tire option (Spindles, wear washers, rod assembly and hardware.) 246981 - Walking Wheel Assembly (2) Recommended pressure: 58 psi (400 kPa) 131567 - Wheel Assembly,...
  • Page 32 Hitch Pole Components HITCH POLE COMPONENTS Middle Bumper Hardware Only 118050 - Bolt, 3/4 x 3 (2) 246503 - Pin, Hitch Pole (2) 118775 - Flat Washer, 3/4 SAE (2) 246700 - Hitch Pole Assy (1) 118845 - Roll Pin, 5/16 x 246507 - Bushing, 1-3/16 (2) 2-1/2 (2) 124029 - Hitch Ball, CAT4 with 2”...
  • Page 33 Rear Gate Components REAR GATE COMPONENTS 810280 - Retaining Ring, 1-1/4 (2) 788601 - Pin, 141518 - 90° Elbow, 3/4 JIC-m x 3/4 JIC-f-sw (1) 1-1/4 x 3-5/8 (1) 141501 - Tee, 3/4 JIC-m x m x m (1) 141583 - Adaptor, 3/4 JIC-f-sw x 9/16 ORB (1) 246375 - Rear Gate Assembly (1) (comes with lower flap assembly) 788601 - Pin, 1-1/4 x 3-5/8 (1)
  • Page 34 Front Shields / Components FRONT SHIELDS / COMPONENTS 246409 - Front Shield, Assembly (1) 133093 - Capscrew, SH M8 129085 - Latch, Draw (2) comes with handle and latches... x 1.25 x 30mm (2) 118998 - Mach Screw, #10-24 x 1/2” (4) 133092 - Handle (1) 118999 - Lock Washer, #10 (4) 118000 - Nut, #10-24 UNC (4)
  • Page 35 Chain & Tightener Components FRONT CONVEYOR & TIGHTENER COMPONENTS 118511 - Flat washer, 3/8 (13) 118503 - Lock washer, 3/8 (13) 118136 - Bolt, 3/8 x 1-1/2 (13) 118403 - Nut, 3/8 (13) 246449 - Chain Tightener Block (2) comes with... 118405 - Nut, 1/2 (2) 118504 - Lock Washer, 1/2 (2) 118336 - Grease Fitting (2)
  • Page 36 Rear Axle & Gearbox Components (SN: 1151 and up) REAR DRIVE AXLE COMPONENTS (Dual Drive Ready) 810282 - Retaining Ring, Ext 2-3/4 (2) 246853 - Key, 16mm x 20mm x 14-3/8” (1) 246847 - Shaft, Gearbox - Dual Drive (1) Gearbox/Hyd.
  • Page 37 Rear Axle & Gearbox Components (SN: up to 1150) REAR DRIVE AXLE COMPONENTS (Standard Drive) 810282 - Retaining Ring, Ext 2-3/4 (1) Gearbox/Hyd. Motor Assembly - RH 118011 - Bolt, 1/2 x 1-1/2 (12) 118504 - Lock Washer, 1/2 (12) 118405 - Nut, 1/2 (12) 246649 - Conveyor Drive Axle (1)
  • Page 38 Rear Dual Drive Conversion Kits 246793 - Dual Drive Conversion Kit (For Machines with SN: 1151 & up) Gearbox/Hyd. Motor Assembly - LH 246853 - Key, 16mm x 20mm x 14-3/8” (1) 117530 - Roll 246847 - Shaft, Gearbox - Dual Drive (1) Pin, Double 1/2 246852 - Spacer, 3-1/4 w/slot (1) x 3-3/4 (2)
  • Page 39 Rear Axle Gearbox Components INTERNAL GEARBOX COMPONENTS 170436 - Gearbox Reducer, 38.7:1 Berma (1) comes with... 118197 - Bolt, M8 x1.25 170439 - Cover Plate, 10H (1) x25mm (10) 170442 - Gear, Output 170440 - Gasket, Cover Plate - 10H (1) 170443 - Bearing, Ball - 61 Tooth (1) 170437 - Gearbox Housing (1)
  • Page 40 Rear Frame & Beater Components REAR BEATER FRAME ASSEMBLY COMPONENTS 143306 - Decal, Danger - Thrown Objects (2) Upper & Lower (RH/LH) 118026 - Bolt, 5/8 x 2 (4) 118508 - Lock Washer, SMV Sign (LH only) 5/8 (4) 118026 - Bolt, 5/8 x 2 (2) 118407 - Nut, 5/8 (4) 118508 - Lock Washer, 5/8 (2) 118407 - Nut, 5/8 (2)
  • Page 41 Rear Frame & Beater Components TOP BEATER FRAME & BEARINGS 246620 - Shield, Top 118302 - Capscrew, Self-Tap - 3/8 x 1 (4) Beater Bearing (1) 117215 - Bearing Unit, Assembly (2) comes with... IMPORTANT: After nut is properly tightened, 118703 - Lock Nut, 5/16 (3) bend tab(s) of lock ring onto nut.
  • Page 42 Rear Frame & Beater Components BEATER CORE, PADDLE & PIN ASSEMBLIES 246691 - Paddle Assembly, Hammer Head - Carbide Tip (12) NOTE It is recommended to replace all 246782 - Seal, Wiper three paddles from a row at the same time to - Dual Lip (2) maintain proper balance of beater assembly.
  • Page 43 Rear Beater Gearbox Components GEARBOX COMPONENTS 170460 - Ring, Threaded (1) 170454 - Washer, Notched (2) 170447 - Complete Gearbox Assembly (1) 170455 - Gear, Pinion - 13 teeth (2) 170485 - Output Hub 170456 - Bearing, Assembly (2) 32212 (2) (See Detail Below) 170459 - Ring, Retaining - Ext.
  • Page 44 Driveline Components DRIVELINE & MOUNTING COMPONENTS Over-running Clutch 246926 - Driveline Shaft, 160373 - Driveline, 1-3/4 x 112-1/2 (2) Slider Shaft (1) 160372 - Driveline, Slider Shaft (1) Previous Wooden Bearing Components 246508 - Shaft Coupler Assembly (1) 117494 - Bolt, Carriage, Facing Forward 5/8 x 1-1/2 (2) comes with...
  • Page 45 Driveline Components 160371 - DRIVELINE SLIDER SHAFT, 26-36 1-3/4” 20-Spline - (Tractor to front shaft Driveline) 160376 - Cross & Bearing, Kit (1) 160330 - Kit, Collar ASG (1) 160378 - Spring Pin (1) 160391 - Yoke 160390 - Yoke, 160392- Yoke, 1-3/4 20 SPL (1) 1-3/4 x 20 Spline (1)
  • Page 46 Driveline Components 160372 - DRIVELINE SLIDER SHAFT, 47-64 1-3/4” 20-Spline - (Shaft Driveline) Note: Cut-out Clutch bolt/ taper pin needs to be checked and re-torqued to 160376 - Cross & 75 ft-lbf (102 N·m) after Bearing, Kit (1) first 2 hrs. of operation (to 160342 - Guard Kit, Replacement (1) loosen or replace, refer to instructions in maintenance...
  • Page 47 Hydraulic Routing - Hose Clamps & Shields HOSE CLAMPS & SHIELDS Hose Clamp Assembly Hose Clamp Assembly 780278 - Hose Clamp 117517 - Bolt, 5/16 x Set, 3/8 (1) 3-1/4 (1) 118503 - Lock 780279 - Top Plate, 3/8 (1) washer, 3/8 (8) 780279 - Top Plate, 118403 - Nut,...
  • Page 48 Hydraulic Routing - Gate Cylinders HOSE ROUTING FOR REAR GATE CYLINDERS Required Hoses for Gate Cylinders Hoses for M34 Only Hoses for M34 Only 126655- Hose, 3/8 x 540 (1) 126619- Hose, 3/8 x 466 (1) Hoses for M28 Only Hoses for M28 Only 126630- Hose, 3/8 x 492 (1) 126663- Hose, 3/8 x 420 (1)
  • Page 49 Hydraulic Routing - Rear Hydraulic Motor HOSE ROUTING FOR REAR HYDRAULIC MOTOR Required Hoses for Hydraulic Motor Hoses for M34 Only Hoses for M34 Only 126686- Hose, 1/2 x 486 (1) 126685- Hose, 1/2 x 354 (1) 16 13 previous previous Hoses for M28 Only Hoses for M28 Only...
  • Page 50 Electrical Components - Flow Control Valve Electrical Control Box Note: Install control box inside of tractor and Note: Attach connect tractor cable electrical wiring to connector. hydraulic lines with plastic tie straps. Tractor Cable 246808 - Hose Wrap, Spiral (2) Connection Note: Wrap hydraulic hoses in pairs with hose wrap (2), include electrical cable.
  • Page 51 Electrical Components - Lights LIGHT ROUTING & COMPONENTS 246530 - Wire Harness, Note: Wire runs through Clearance Lights (1) top tube to LH Light. LH Light Wire Harness for Lights RH Light Wire Harness with Plug Note: Attach electrical wiring to hydraulic lines with plastic tie straps.
  • Page 52 Electrical Components - Lights (Previous) PREVIOUS - LIGHT ROUTING & COMPONENTS Note: Wire runs through top tube to LH Light. LH Light Wire Harness for Lights RH Light Wire Harness with Plug Note: Attach electrical wiring to hydraulic lines with plastic tie straps. Module (Previous) 246528 - Clearance Lights 246526 - Light Enhancing Module (1)
  • Page 53 Side Extensions (Optional) OPTIONAL SIDE EXTENSION KITS (Optional) 249023 - Side Extension Bundle, M34 (1) (Optional) 249000 - Side Extension Bundle, M28 (1) (Shown installed below) SIDE EXTENSION COMPONENTS 249002 - Side Extension, RH - M28 (1) 249001 - Side Extension, LH - M28 (1) - OR - 249021 - Side Extension, RH - M34 (1) 249010 - Rear Bracket - RH (1)
  • Page 54 Skid Plate Kits (Optional) OPTIONAL GEARBOX AND MOTOR SKID PLATE KIT (Single Drive) (Optional) 247991 - Single Drive Kit (1) 118760 - Flat 117972 - Bolt, Washer, M16 (12) M14 x 70 (6) 117995 - Lock 117973 - Lock 117974 - Flat Washer, M16 (12) Nut, M14 (6) Washer, M14 (12)

  • Page 55: Warranty

    Re-torque of fastening hardware, Hydraulic fluid purities, drive train alignments, and clutch operation) 3. If parts not made or supplied by Degelman have been used in the connection with the unit, if, in the sole judgement of Degelman such use affects its performance, safety, stability or reliability.

  • Page 56: Warranty Information

    It is the retail customer’s responsibility to deliver the product to the authorized Degelman dealer, from whom he purchased it, for service or replacement of defective parts, which are covered by warranty. Repairs to be submitted for warranty consideration must be made within forty-five days of failure.

This manual is also suitable for:

Manure spreader m34

Table of Contents