Toshiba Satellite U505-S2960 User Manual page 150

Satellite U500/U500D, Satellite Pro U500/U500D
Problem
External devices
connected to the
compatible ports do
not work when
connected to a
compatible port.
The "USB WakeUp
function" does not
work.
Memory expansion
Refer also to Chapter 8,
memory modules.
Problem
The computer hangs
up
9-16
Procedure
Some external devices may not work when
connected to a compatible port when the "USB
Sleep and Charge function" is [Enabled] in the
BIOS Setup.
Reconnect the external device after turning ON
the computer.
If the external device still doest not work, connect
device to an USB port that does not have the USB
Sleep and Charge function-compatible icon ( ) or
change the "USB Sleep and Charge function"
setting to [Disabled] in the BIOS Setup.
When "USB Sleep and Charge function" is set to
[Enabled] in the HW Setup, the "USB WakeUp
function" does not work for ports that support the
USB Sleep and Charge function.
In that case, use an USB port that does not have
the USB Sleep and Charge function-compatible
icon ( ) or change the "USB Sleep and Charge
function" setting to [Disabled] in the BIOS Setup.
Optional Devices for information on installing
Procedure
Make sure the memory module installed in the
expansion slot is compatible with the computer.
If an incompatible module has been installed,
follow the steps below.
1. Turn off the power.
2. Disconnect the AC adaptor and all peripheral
devices.
3. Remove the battery pack.
4. Remove the memory module.
5. Replace the battery pack and/or connect the
AC adaptor.
6. Turn on the power.
If problems persist, contact your dealer.
User's Manual