Inserting A Battery; Disposing Of Used Batteries Safely - Toshiba Satellite P20-8PW User Manual

Inserting a battery

1. Slide the battery into the 2nd Module Bay. When it is fully inserted,
you should hear it click into place (1).
The2nd ModuleBay Latch is spring-loaded and clicks as it latches the
battery in place when you insert it.
2. Turn the computer bottom side up and ensure the battery is fully
inserted in the bay. Also make sure that the 2nd Module Bay Latch is
secured to the left (2).
3. Secure the 2nd Module Bay Lock (3).
If the battery housing is leaking or cracked, put on protective gloves to
handle it and discard it immediately following the advice in the following
section on "Disposing of Used Batteries Safely".
The battery can only be inserted into the 2nd Module Bay.

Disposing Of Used Batteries Safely

You can recharge a battery many times. When the useful life of the
battery expires or if the battery becomes damaged, you must discard it
responsibly.
Batteries should not be disposed of together with household waste. To
make sure that they are forwarded to recycling or proper disposal they
may be returned free of charge to an authorized TOSHIBA
dealer/distributor.
Use only batteries recommended by TOSHIBA as replacements.
The computer uses a Li-Ion battery which can explode if not handled or
disposed of properly. Putting spent batteries in the trash is not only
irresponsible, it may also be illegal. Dispose of the battery as required by
local ordinances or regulations.
User's Manual
Mobile Computing
4-9