Solid State Drive - Toshiba Satellite A500-ST56X1 User Manual

Display Power Saving Technology:
Your model may include the Display Power Saving Technology feature that
can save the computer's power consumption by optimizing picture contrast
on the internal LCD. This feature can be used if the computer is:
configured with Mobile Intel
chip by Intel
running under battery mode
using the internal LCD display only
The power and performance settings can be adjusted in the Intel
and Media Control Panel.
To access this control panel, go to
Control Panel -> Appearance and Personalizaion -> Display ->
Change display settings -> Advanced settings -> Intel(R) Graphics
and Media Control Panel -> Graphics Properties -> Power -> Power
Features -> Graphics Power Plan Settings -> select On battery ->
Display Power Saving Technology
If you want to improve the picture quality under the conditions mentioned
above, adjust the setting towards Maximum Quality or disable this feature.
*Please visit your region's web site or refer to the catalog for the
configuration details of the model that you have purchased.

Solid State Drive

Problem
Computer does not
boot from hard disk
drive
User's Manual
HM55 Express Chipset model in graphic
®
*
®
Procedure
Check to see whether that is a floppy diskette in
the floppy diskette drive or a CD-ROM/DVD-ROM
in the optical disc drive - if so remove it and try to
start the computer again.
If this has no effect, check the Boot Priority
setting within the TOSHIBA HW Setup
utility- please refer to the
Chapter 7,
information.
Please refer to your operating system
documentation in order to determine whether
there is a problem with any of the operating
system files or settings.
Boot Priority
HW Setup and Passwords, for further
Satellite A500/A500D
Graphics
®
section in
9-9