Advertisement
Advertisement
Table of Contents
Related Manuals for Oxygen Mecca
Summary of Contents for Oxygen Mecca
- Page 1 INSTALLATION INSTRUCTIONS Please read and save these instructions Scan QR code to download the BOND app The Mecca Smart Ceiling Fan © 2023 oxygen Lighting. All Rights reserved. 201 Raihead Rd Fort Worth, TX 76106 (877) 607-0202 FAX (877) 607-0203 IO358-04/23...
-
Page 2: Warranty & Service
Complete and mail the enclosed (RGA) prior to returning the defective box and packaging. Oxygen will not bear warranty card within 10 days to ensure unit or part. Call (877) 607-0202 - responsibility for any shipping damage. -
Page 3: Safety Rules
12. Mounting hardware (wire nuts, wood screws, machine screws, lock washers, spring washers, metal washers.) IF YOU FIND THAT PARTS ARE MISSING. CONTACT YOUR DEALER FOR REPLACEMENT, OR CALL OXYGEN DIRECTLY AND WE WILL MAIL REPLACEMENTS TO YOU IMMEDIATELY. -
Page 4: Mounting Options
3. MOUNTING OPTIONS 1. Disconnect the power by removing fuses WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, OR PERSONAL INJURY, or turning off circuit breakers. MOUNT THE FAN ONLY TO AN OUTLET MARKED ACCEPTABLE FOR FAN SUPPORT AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX. -
Page 5: Hanging Your Fan
4. HANGING YOUR FAN WARNING - Turn off the power! Fig. 8 Fig. 5 Downrod 1. Secure the hanger bracket to the outlet Outlet box box using the 2 long steel screws supplied (j-box) with the outlet box (Fig. 5). Canopy Hanger bracket 2. -
Page 6: Electrical Connections
5. ELECTRICAL CONNECTIONS WARNING! SHUT OFF THE POWER WITH FUSE OR CIRCUIT BREAKER. SAFETY PRECAUTIONS Fig. 12a • Disconnect electric power source by removing fuse or switching OFF circuit breaker • Do not use with solid state fans • Electrical wiring must meet all local and national electrical code requirements •... - Page 7 6. COMPLETING THE INSTALLATION Fig. 15 Fig. 17 1. Make sure the wiring is safely inside the outlet box as instructed in Step 5 -Electrical Connections. To install the canopy, remove Canopy one of the two canopy screws from the bottom of the mounting bracket and slightly loosen the other canopy screw (Fig.
- Page 8 7. OPERATING YOUR TRANSMITTER Fig. 19 1. WALL AND FACE PLATES • This fan is supplied with two finish wall and face plates for the control - White and Almond. • Select finish plates and attach to the control after installing the battery and setting the frequency.
- Page 9 8. FAN OPERATION AND CARE 3. Clean you fan periodically using only 1. A ceiling fan is an environmentally Fig. 20 a cloth dampened with a mild detergent smart choice to cool as well as to help solution for all hardware - never use warm your home or office.
-
Page 10: Troubleshooting
3. Be sure ON/OFF power switch on the the ceiling. cost directly form Oxygen Lighting. wall control is in ON position. Please call us at (877) 607-0202, 6. Check that all screws on the motor Monday through Friday from 8:00 A.M. - Page 12 TROUBLESHOOTING TO PERFORM A FACTORY RESET: The Factory Reset will erase all fan settings, schedules, and disconnect from your Wi-Fi network. However, the fan will remain paired with the remote control. 1. Turn off the breaker or wall switch. 2. Turn the vreaker/switch back on. 3.
Need help?
Do you have a question about the Mecca and is the answer not in the manual?
Questions and answers