Subscribe to Our Youtube Channel
Related Manuals for jcb JCB-SL-KONNECT-360
Summary of Contents for jcb JCB-SL-KONNECT-360
- Page 1 JCB-SL-KONNECT-360 MAINS OR 18V DC BATTERY POWERED LIGHT BACK OF LIGHT 7500 lumens Battery cover provides IP65 protection for battery Mains Connection Battery Status Indicator Mains Power Lead Use your own power tool battery Version: 2.0/0923...
-
Page 2: Product Description
220-240V, 50/60Hz 5M H07RN-F 2 x 1.0mm² industrial waterproof mains cable Battery: 18V main brand power tool batteries Including connectors for: JCB, DeWalt, Milwaukee, Bosch, Makita, Metabo/CAS Also available for: Hikoki , Festool 3 Light settings: 25%, 50%, 100% Output:... -
Page 3: Operation
OPERATION - USING MAINS CABLE To operate with the mains cable supplied Ensure the cable is unplugged and not connected to an electrical source Remove the waterproof plug cap A as shown in figure 1 Align the connector B with the socket A and gently push so that it locates and locks into place as shown in figure 2 Turn on the electricity, switch on the light to the settings required, using the switches on the handle. - Page 4 OPERATION - USING 18V POWER TOOL BATTERIES Release the battery cover latch and open as per figure 1 Insert the correct 18V battery connector and clip into place as per figure 2 Version: 2.0/0923...
- Page 5 Slide the 18V battery onto the connector until it clicks in place as per figure 3 Close the battery cover and lock with the latch as per figure 4 The light is now ready to use with the battery The battery status indicator shows how much power you have left in your battery If you wish to remove the battery cover press together the 2 plastic tabs on the inside of the cover which locate the hinge pins and take the cover off.
- Page 6 OPERATION - LOW BATTERY REMINDER When the battery is at 25% power, the battery indicator light will flash, meaning the battery needs changing. The light incorporates battery discharge protection so that it will not damage the battery if it is fully discharged OPERATION - BRIGHTNESS &...
- Page 7 MOUNTING - TRIPOD OR HANGING HOOK The light can be mounted on a tripod via the internal M8 thread which just screws into the top of the tripod giving a secure fixing, or via the hanging hook located on the bottom of the light.
-
Page 8: Safety Notice
SAFETY NOTICE Prior to use carry out the necessary risk assessment considering the people who could be at risk, the level of risk and the precautions required to control the risk. GENERAL Ensure that the battery is correctly fitted before use DO NOT Cover or block the lens during use DO NOT shine the product directly into the eyes of people or animals DO NOT allow children to use the worklight... - Page 9 GUARANTEE This product is guaranteed against manufacturing defects for a period of 3 years from the date of purchase. Repair or replacement of products will be undertaken providing that: • The product has been subject to fair wear and tear only •...
- Page 10 Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances. www.jcbworklights.com | sales@jcbworklights.com JCB Lighting is used under licence by Property Perspective Ltd Version: 2.0/0923...
Need help?
Do you have a question about the JCB-SL-KONNECT-360 and is the answer not in the manual?
Questions and answers