jcb -SL-KONNECT 6500 Instructions & User's Manual

Mains or 18v dc battery powered light

Advertisement

Quick Links

JCB-SL-KONNECT 6500
MAINS OR 18V DC BATTERY POWERED LIGHT
Handle
6500 LUMEN LED floodlight
Diecast aluminium body
Dust / waterproof IP65
Powerbank output 5V DC, 2A
Battery status indicator
Power switch
Power input
Brightness indicator
Adjustable stand
with tripod mount
Version: 2.0/0923

Advertisement

Table of Contents
loading

Summary of Contents for jcb JCB-SL-KONNECT 6500

  • Page 1 JCB-SL-KONNECT 6500 MAINS OR 18V DC BATTERY POWERED LIGHT Handle 6500 LUMEN LED floodlight Diecast aluminium body Dust / waterproof IP65 Powerbank output 5V DC, 2A Battery status indicator Power switch Power input Brightness indicator Adjustable stand with tripod mount...
  • Page 2: Product Description

    5 metre industrial quality mains cable fitted with 240V 13 Amp BS plug, 110V plug or 220/240V EU plug Also powered by: 18V main brand power tool batteries Connectors for: JCB, DeWalt, Milwaukee, Bosch, Makita, Metabo, CAS Output: 6500 lumens Light source: Body composition:...
  • Page 3 OPERATION - USING MAINS CABLE To operate using the mains cable supplied Ensure that the cable is unplugged and not connected to the electricity source Remove the plug cover cap A as shown in figure 1 Align the connector B with the socket A and push gently so that it locates and locks into place as shown in figure 2 AB Turn on the electricity, switch on the light and use the brightness settings to get the level required...
  • Page 4: Operation

    OPERATION - USING 18V POWER TOOL BATTERIES Release the battery cover latch and open as per diagram 1 © fl:IJ Insert the correct connector for the battery you are going to use and clip in place as per diagram 2 below ��...
  • Page 5 > ❖ Close the battery cover and lock in place with the latch as per diagram 4 as below The light is now ready to use with the battery The battery status indicator shows you how much power you have left in your battery Press the on/off switch and set the light to the brightness level required If you wish to remove the battery cover press together the 2 plastic tabs on the inside of the cover which locate the hinge pins and take the cover off...
  • Page 6: Safety Notice

    SAFETY NOTICE Prior to use carry out the necessary risk assessment considering the people who could be at risk, the level of risk and the precautions required to control the risk. GENERAL Ensure that the battery is correctly fitted before use DO NOT Cover or block the lens during use DO NOT shine the product directly into the eyes of people or animals DO NOT allow children to use the worklight...
  • Page 7 GUARANTEE This product is guaranteed against manufacturing defects for a period of 3 years from the date of purchase. Repair or replacement of products will be undertaken providing that: • The product has been subject to fair wear and tear only •...
  • Page 8 Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances. www.jcbworklights.com | sales@jcbworklights.com JCB Lighting is used under licence by Property Perspective Ltd Version: 2.0/0923...

Table of Contents