Getting Started: Activating; Roady2 - Delphi SA10085 User Manual

6
Getting Started: Activating Roady2
To quickly begin enjoying Delphi XM Satellite Radio, follow these simple steps:
1. Set up your Roady2 using the installation instructions in Section 5 of this
guide (see page 17) or with the help of a professional installer.
2. Press the power button to turn your Roady2 on and verify that it is
playing Channel 1, the XM Preview Channel.
3. Select Channel 0. The receiver's eight-character XM Satellite Radio ID
number will appear on the display. Write the number here:
Note: Carefully check your XM Radio ID. The letters I, O, S, and F are not used.
4. Activate your XM Satellite Radio service. To subscribe, make sure you
have a major credit card and your XM Satellite Radio ID number
handy and contact XM at http://activate.xmradio.com. You can also
activate your service by calling 1-800-852-9696.
Note: You will need to keep your Roady2 on for at least one hour after activation and installation to
receive the full channel lineup.
Warning: When using this product it is always
important to keep your eyes on the road and your hands
on the wheel. Not doing so could result in injury to you
or to others or in property damage.
Caution: Failure to properly fol-
low all installation instructions may result
in personal injury or damage to your Roady2
or to your vehicle.