Table of Contents
Advertisement
Chapter 7: BIOS
System Health Monitor
CPU Overheat Alarm
o
Use the "+" and "-" keys to set the CPU temperature threshold to between 65
o
and 90
C. When this threshold is exceeded, the overheat LED on the chas-
sis will light up and an alarm will sound. The LED and alarm will turn off once
the CPU temperature has dropped to 5 degrees below the threshold set. The
o
default setting is 72
C.
The submenu includes monitor displays for the following information:
CPU1 Temperature, CPU2 Temperature (for dual CPU systems), System Tem-
perature, VCore1, VCore2 (for dual CPU systems), 3.3V, +5Vin, +12Vin, 5V stby
and battery voltage.
System Fan Monitor
Fan Speed Control Modes
This feature allows the user to determine how the system will control the speed of
the onboard fans. Select "Workstation" if your system is used as a Workstation.
Select "Server" if your system is used as a Server. Select "Disable" to disable
the fan speed control function to allow the onboard fans to continuously run at
full speed (12V). The options are 1) Disabled (Full Speed)
2) Server Mode
and 3) Workstation Mode.
FAN1 Speed through FAN8 Reading
The speeds of the onboard fans (in rpm) are displayed here.
7-15
Advertisement
Table of Contents
