ECG-SG-20-004
SERVICE GUIDE
Purpose
Version
References
Tools
Advisory
messages
Version I
03/2024
ABOUT THIS DOCUMENT
The purpose of this document is to describe how to manage the
control platform.
Document number ECG-SG-20-004, Version I
The latest version of the service guide is available on CIAT intranet:
https://intranet.ciat.com/documentation
The following list includes all documents that may be source of reference for material
discussed in this publication.
•
IOM Control [10589_CONTROL]
•
BACnet service guide [CONNECT TOUCH controller]
•
Modbus service guide [CONNECT TOUCH controller]
The following list includes tools that the document refers to.
•
ProView Service Tool: used for software upload, translation files
download/upload dedicated to PIC-6 Controllers, including Network Service
Tool V, PC-DCT, WinLoader, HVAC-S-Service, ProView.
•
Smart Service tool: Used to generate Service or Factory password from rolling
QR code generated by PIC-6 controllers "Connect Touch"
Advisory messages are used to warn you about conditions that could cause unwanted
results and provide guidance on how to perform certain procedures.
Note messages point out the most important information that you should
read.
Caution messages are used to warn against potentially dangerous
situations that could result in equipment damage.
Information messages give you some useful information about the current
topic.
Connect Touch
AQUACIAT LD / ILD
CONNECT TOUCH
Page
2/230
Need help?
Do you have a question about the CONNECT TOUCH Control and is the answer not in the manual?