1. Manuals
  2. Brands
  3. Blue Torrent Manuals
  4. Water Pump
  5. mx110dnsbs
  6. Universal instructions

Blue Torrent mx110dnsbs Universal Instructions

Single speed pumps
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

UNIVERSAL INSTRUCTIONS
FOR ALL
SINGLE SPEED
PUMPS
READ THIS MANUAL CAREFULLY BEFORE
USING YOUR NEW PUMP
8808

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the mx110dnsbs and is the answer not in the manual?

Questions and answers

Related Manuals for Blue Torrent mx110dnsbs

Summary of Contents for Blue Torrent mx110dnsbs

  • Page 1 UNIVERSAL INSTRUCTIONS FOR ALL SINGLE SPEED PUMPS READ THIS MANUAL CAREFULLY BEFORE USING YOUR NEW PUMP 8808...
  • Page 2 JH PUMP PARTS BREAKDOWN PART # MODEL # DESCRIPTION JHHT JHVT AC 81361 Pump Lid AC 81396 Pump Lid O-Ring AC 81434 Pump Basket AC 81744 Strainer Clip AC 23604 Strainer Housing AC 81779 Pump Cover AC 31569 Dual Port Cover AC 81795 Impeller 1 HP AC 81817...
  • Page 3 MAXI-PUMP PARTS BREAKDOWN PART # MODEL # DESCRIPTION MXHT MXVT AC 81361 Pump Lid AC 81396 Pump Lid O-Ring AC 81434 Pump Basket AC 81744 Strainer Clip AC 23604 Strainer Housing AC 81779 Pump Cover AC 31569 Dual Port Cover AC 81795 Impeller 1 HP AC 81817...

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS All wiring should be done by a qualified electrician in accordance NOTE to the National Electric Code and all Local Codes and ordinances. When installing and using this electrical equipment, basic safety precautions should ALWAYS be followed. READ AND FOLLOW ALL INSTRUCTIONS WARNING 1.

  • Page 5: Operation And Maintenance

    OPERATION AND MAINTENANCE PUMP LOCATION 1. Locate the pump on a level surface as close to the pool as practical. Consult local codes for minimum distances between pool and pump if applicable. 2. The connection plumbing (hose or rigid pipe) should be direct and as free from turns and bends as possible.

  • Page 6: Pump Installation

    PUMP INSTALLATION 1. When connecting plumbing fittings to the pumps threaded ports, it is recommended that thread seal tape (Teflon tape) be used. If the suction (intake) connection is not sealed correctly the pump will not prime properly and will pump only small volumes of water or no water at all. 2.
  • Page 7 PUMPS EQUIPPED WITH DUAL PORT DISCHARGE • You can use the horizontal or the vertical port to connect to your filter. Once you select which port you are using you need to install the discharge cap onto the other port opening. Simply screw the cap into position on the unused port. Hand tighten only and continue to connect your pump to the filter tank with connections provided with the filter.

  • Page 8: Pump Maintenance

    IF PUMP IS EQUIPPED WITH OPTIONAL ON/OFF SWITCH 1. Switch is used to manually turn ON or OFF the pump 2. Press rocker switch to the right side to turn pump ON 3. Press rocker switch to the left to turn pump OFF PUMP MAINTENANCE •...

  • Page 9: Troubleshooting Guide

    TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Pump will not Prime Suction Air Leak Make sure see thru lid and O-Ring are clean, lubricated and tightened. Tighten all hoses and pipes on the suction side of the pump. Be sure water level in the swimming pool is high enough to flow through skimmer.

Table of Contents