Zebronics ZEB-VIGOR 200 User Manual page 8

• Connect one end of the cable to the AUX-In
port on the speaker and the other end an
audio source.
• The audio from the source can be Played
through the speaker.
TWS Function:
Turn on both "ZEB-VIGOR 200" speakers in
•
BT mode Press and hold the Play/Pause
button for 3-5 seconds in any one of the
speaker to initiate TWS pairing.
• After few seconds both speakers will get
connected successfully.
• Now search for nearby BT device in you
mobile phone or other source device and
tap on BT name "ZEB-VIGOR 200" to
connect. To exit TWS mode, press and hold
the Play/Pause button for 3-5 seconds
Recording Function:
• To record mic input, first plug-in a USB/mSD
card into the speaker, it will act as a storage
device.
• Press the REC key on the remote to
start/stop recording.