Page 1
Room Kit for Google Meet GQE20A User Guide...
Page 3
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
Contents Package contents ..................7 Getting to know your Meet Compute System Features ...................... 14 Front view ....................14 Rear view .....................15 Left side view ....................19 Right side view ....................19 Bottom view ....................20 Using your Room Kit for Google Meet Getting started .................... 22 Connect a display panel to your Meet Compute System ......22 Connect the touchscreen ................24 Connect the speakerphone (for room kits) ..........26...
Page 5
Appendix Safety information ..................56 Setting up your system ................57 Care during use ...................58 Regulatory notices ..................60 Service and Support ................... 65...
Page 6
About this user guide This user guide provides information about the hardware and software features of your Room Kit for Google Meet, organized through the following chapters: Chapter 1: Getting to know your Meet Compute System This chapter details the hardware components of your Meet Compute System.
Package contents Your Room Kit package contains the items detailed below. You can also refer to the Room Kit peripheral table for details on the peripheral items included in the different kits. Meet Compute System items: Meet Compute System Standing mount HDMI™...
Page 8
Peripheral items: Touchscreen Touchscreen power adapter Touchscreen Touchscreen Touchscreen HDMI™ cable USB data cable adapter plug heads* * The bundled power adapter plug heads may vary depending on the country (or region) of sale.
Page 9
Speakerphone Speakerphone power adapter Speakerphone USB cable Speakerphone auxiliary Speakerphone power cord** (Micro USB to Type-A) cable Expansion speakerphone Expansion cable ePTZ camera Camera USB cable Tripod mount screw (Type-C to Type-A) ® ** The speakerphone power cord is included in the main box with your Meet Compute System and not in a separate box with the speakerphone.
Page 10
PTZ camera Camera power adapter and 6 plug heads* Camera USB cable (Type-B to Type-A) Camera remote control Wall mount brackets Wall mount screws Tripod mount screws Meet Compute System remote control kit * The bundled camera power adapter plug heads may vary depending on model and the country (or region) of sale.
Page 11
• If the device or its components fail or malfunction during normal and proper use within the warranty period, bring the warranty card to the ASUS Service Center for replacement of the defective components. • The bundled accessories may vary depending on your model.
Page 12
Camera and speakerphone user manuals To download the user manuals for the optional cameras and speakerphones, visit http://www.aver.com/download/GoogleMeet.
Rear view Power button The power button allows you to turn the Meet Compute System on or off. You can use the power button to put your Meet Compute System to sleep mode or press it for four (4) seconds to force shutdown your Meet Compute System.
Page 16
Thunderbolt™ 4 port This Thunderbolt™ 4 port provides the following: • Transfer rate of up to 40 Gbit/s for Thunderbolt™ 4 devices. • DisplayPort 1.4 support (7680 x 4320 @60Hz). • Backward compatible to USB4 and USB 3.2. • USB power delivery with a maximum of 5 V / 1.5 A output.
Page 17
USB 3.2 Gen 2 Type-C /DisplayPort combo port ® This USB Type-C (Universal Serial Bus) port provides the ® following: • Transfer rate of up to 10 Gbit/s. • Support for DisplayPort 1.4 (7680 x 4320 @30Hz). Use a USB Type-C adapter to connect your Meet Compute ®...
Page 18
Power input The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Meet Compute System. To prevent damage to the Meet Compute System, always use the supplied power adapter. WARNING! The power adapter may become warm to hot when in use.
Left side view Air vents (intake vent) The air vents allow cooler air to enter your Meet Compute System chassis. IMPORTANT! For optimal heat dissipation and air ventilation, ensure that the air vents are free from obstructions. Right side view Air vents (exhaust vent) The air vents allow your Meet Compute System chassis to expel hot air out.
Getting started Before setting up your system, carefully read and follow all instructions in the documentation, especially the Safety Information section in the Appendix. Connect a display panel to your Meet Compute System You can connect a display panel or projector that has the following connectors: •...
Connect the touchscreen To connect the touchscreen to your Meet Compute System: Connect the USB Type-C end of the touchscreen USB data cable ® to the data USB port on your touchscreen. Connect the touchscreen to a USB 3.2 Gen 2 Type-A port on the rear of your Meet Compute System.
Connect the speakerphone (for room kits) To connect the speakerphone to your Meet Compute System: Connect the micro USB end of the speakerphone USB data cable to the data USB port on your speakerphone. Connect the other end of the USB data cable to the USB Type-A port located at the bottom of the touchscreen.
Connect the speakerphone (for starter kits) To connect the speakerphone to your Meet Compute System: Connect the micro USB end of the speakerphone USB data cable to the data USB port on your speakerphone. Connect the other end of the USB data cable to a USB Type-A port on your Meet Compute System.
Connect expansion speakerphone (optional) To daisy-chain expansion speakerphones: Connect one end of an expansion cable to the speakerphone port on the rear of your master speakerphone. Connect the other end of the expansion cable to the OUT port on the expansion speakerphone. To connect a second expansion speakerphone, connect one end of an expansion cable to the IN port on the first expansion...
Connect a camera NOTE: For more information on the recommended USB 3.2 Gen 2 Type-A port to connect the camera to, refer to the section Connect your cables. To connect the ePTZ camera to your Meet Compute System: Camera USB cable (Type-C®...
Page 30
To connect the PTZ camera to your Meet Compute System: Camera USB cable (Type-B to Type-A)
Page 31
To connect the touchscreen for local presentations (optional) NOTE: Ensure to use the Touchscreen HDMI™ cable. Connect the Touchscreen HDMI™ cable to the HDMI™ port on your touchscreen. Connect the touchscreen to a device’s (such as a laptop) HDMI™ out port for local presentations. WARNING! Do not connect the HDMI™...
Connect the remote control dongle (for starter kits) Connect the remote control USB dongle to the USB 3.2 Gen 2 Type-C ® DisplayPort combo port on the rear of your Meet Compute System using the bundled USB Type-C to Type-A adapter. ®...
Connect the AC power adapter to your Meet Compute System To connect the AC power adapter to your Meet Compute System: Connect the AC power cord to the AC/DC adapter. Connect the DC power connector to your Meet Compute System’s power (DC) input jack.
Page 34
IMPORTANT! • We strongly recommend that you use only the AC power adapter that came with your Meet Compute System. • We strongly recommend that you use a grounded wall socket while using your Meet Compute System. • The socket outlet must be easily accessible and near your Meet Compute System.
Turn on your Meet Compute System Press the power button to turn on your Meet Compute System. IMPORTANT! Ensure that all peripherals (speakerphone, camera, touchscreen) and AC power adapter are connected properly before you turn on your Meet Compute System.
Before you begin using your device for video conferencing Setup requirements Room size and setup Your Room Kit system is designed for a conference room of up to 13 persons. We recommend a room that contains either a long table with the monitor at one end (optimal), or a round table.
For HD video quality • Latency should be less than 50 ms when pinging Google’s public DNS server at 8.8.8.8. • Outbound signals from a participant in all situations must meet a 3.2 Mbps bandwidth requirement. • Inbound signals depend on the number of participants: - 2.6 Mbps with 2 participants - 3.2 Mbps with 5 participants - 4.0 Mbps with 10 participants...
Display requirements and placement Your Meet Compute System work with LCD, LED, plasma, and projector- type monitors and televisions. The display must have an HDMI™ or DisplayPort input. You can place the display on a table against one wall, or mount the display on a wall or ceiling for a projector unit.
Setup your system You can mount your Meet Compute System to the wall mounting plate or mount the Meet Compute System to the standing mount. WARNING! • Pulling or pushing on the Meet Compute System may cause the device to fall. •...
Page 42
Secure the wall mount to a wall using the four (4) screws. NOTE: The screws are self tapping M3.5 24 mm long, flat countersunk head type screws. Locate the mount pad slot on the bottom of your device and orientate it as shown in the illustration below so that the exhaust air vents face upwards.
Page 43
Your device will be held in place magnetically to the wall mount plate. Please ensure the mount pad slot is aligned with the wall mount plate before placing the device onto it. NOTE: Please refer to Chapter 1 Getting to know your Meet Compute System for more information on the location of the mount pad slot.
Page 44
Using the standing mount To attach your Meet Compute System to the bundled standing mount, please follow the steps below: Locate the mount pad slot on the bottom of your device and orientate it as shown in the illustration below so that the exhaust air vents faces upwards.
Page 45
Align your device’s mount pad slot to the standing mount, then bring the device closer to the mount. Your device will be magnetized and attach onto the standing mount. Manually adjust your device if needed for a more secure fit.
Connect your cables Using the included cables and sensor, connect your Meet Compute System to the other system components: NOTE: The connections shown in the illustrations are recommended; you may adjust the connections accordingly to suit your needs. USB 3.2 Gen 2 Type-C /DisplayPort combo port connects to a ®...
Page 47
USB 3.2 Gen 2 Type-A port connects to the touchscreen or camera. USB 3.2 Gen 2 Type-A port connects to the touchscreen or camera. LAN port connects to a router. NOTE: Although you can use your Meet Compute System device over a wireless network connection, we recommend using a wired network connection for optimal sound and video quality.
Enroll your device Complete basic enrollment This section explains the basic enrollment flow, which works for almost all users. To learn about other options shown during the enrollment process, see Advanced enrollment options. NOTE: We recommend connecting a USB keyboard to make entering the enrollment information easier.
Page 49
When the Google Meet screen appears, follow the onscreen instructions to test your camera and speakerphone. NOTE: If you can’t see video or hear audio during the test: • Ensure that your camera and speakerphone are connected to your Meet Compute System before you turned on your device.
Page 50
Advanced enrollment options Users can go through the simple enrollment flow described in the section Complete basic enrollment to enroll their device. Additional options are available for users who want to customize the setup experience or learn more. These options appear on the second enrollment screen, except for accessibility, which appears on both the first and second screens: Accessibility: Accessibility options include larger font and cursor...
Manage devices and rooms You can view, modify and update your Meet Compute System and rooms through the Google Admin console. For more details on managing your devices and rooms, please visit the Manage Google Meeting Room Hardware website.
Fix a problem Manage devices and rooms I do not know how to identify the Meet Compute System device I want on the device list screen. If you are not sure which device to click, you can identify the correct one by its serial number.
Safety information Your Meet Compute System is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. • Do not ingest battery, Chemical Burn Hazard. •...
Setting up your system • Read and follow all instructions in the documentation before you operate your system. • Do not use this product near water or a heated source. • Set up the system on a stable surface. • Openings on the chassis are for ventilation.
Care during use • Do not walk on the power cord or allow anything to rest on it. • Do not spill water or any other liquids on your system. • When the system is turned off, a small amount of electrical current still flows.
Page 59
Lithium-Metal Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users.
Regulatory notices COATING NOTICE IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the I/O ports are located. HDMI Trademark Notice The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress, and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
ISED Radiation Exposure Statement for Canada This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with ISED RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.
Page 62
ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements.
Page 63
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
Page 64
EPEAT (Electronic Product Environmental Assessment Tool) registered products The public disclosure of key environmental information for ASUS EPEAT registered products is available on https://esg.asus.com/en/ Ecolabel.htm. More information about EPEAT program and purchaser guidance can be found on the EPEAT website www.epeat.net.
Service and Support Visit our multi-language website at https://www.asus.com/support/.
Page 67
Kit de salle pour Google Meet GQE20A Manuel de l'utilisateur...
Page 69
(y compris les dégâts pour manque à gagner, pertes de profits, perte de jouissance ou de données, interruption professionnelle ou assimilé), même si ASUS a été prévenu de la possibilité de tels dégâts découlant de tout défaut ou erreur dans le présent manuel ou produit.
Page 70
Table des matières Contenu de la boîte ....................7 Présentation de votre kit Meet Compute System Fonctionnalités .......................14 Vue avant ........................14 Vue arrière .......................15 Côté gauche ......................19 Côté droit ........................19 Vue arrière .......................20 Utiliser le kit de salle pour Google Meet Prise en main ......................22 Connecter un périphérique d'affichage à...
Page 71
Annexes Consignes de sécurité ....................56 Configurer le système ....................57 Précautions à suivre lors de l'utilisation ..............58 Informations réglementaires .................60 Service et assistance .....................64...
À propos de ce manuel Ce manuel offre une vue d'ensemble des caractéristiques logicielles et matérielles de votre kit de salle pour Google Meet, et est constitué des chapitres suivants : Chapitre 1 : Présentation de votre kit Meet Compute System Ce chapitre détaille les composants matériels de votre kit Meet Compute System.
Contenu de la boîte La boîte de votre kit de salle pour Google Meet contient les éléments suivants. Vous pouvez également consulter le tableau des périphériques du kit de salle pour Google Meet pour plus de détails sur les périphériques inclus dans les différents kits.
Page 74
Périphériques : Écran tactile Adaptateur secteur pour écran tactile Câble HDMI™ pour écran Câble de données USB pour Têtes de prise de l'adaptateur tactile écran tactile secteur pour écran tactile* Les têtes de prise fournies peuvent varier en fonction et du pays (ou région) d'achat.
Page 75
Haut-parleur Adaptateur secteur du haut- parleur Câble USB du haut-parleur Câble auxiliaire du haut- Cordon d'alimentation du haut- (Micro USB vers Type-A) parleur parleur** Haut-parleur d'extension Câble d'extension Caméra ePTZ Câble USB de la caméra Vis de montage sur trépied (Type-C®...
Page 76
Caméra PTZ Adaptateur secteur de caméra et 6 têtes de prise* Câble USB de la caméra (Type-B vers Type-A) Télécommande de la caméra Support de fixation murale Vis pour fixation murale Vis de montage sur trépied Télécommande du kit Meet Compute System L'adaptateur secteur de la caméra et les têtes de prise peuvent varier en fonction du modèle et du pays (ou région) d'achat.
Page 77
Si l'appareil ou l'un de ses composants tombe en panne dans des conditions d'utilisation normales, et ce lors de la période de garantie, rendez-vous dans le service client ASUS le plus proche de chez vous muni de la carte de garantie pour une prise sous garantie de votre appareil.
Page 78
Manuels d'utilisation de la caméra et du haut-parleur Pour télécharger les manuels d'utilisation des caméras et des haut-parleurs optionnels, visitez http://www.aver.com/download/GoogleMeet.
Fonctionnalités Vue avant Voyant LED Ce voyant lumineux s'allume pour indiquer que votre kit Meet Compute System accède à un ou plusieurs supports de stockage comme le disque dur interne.
Vue arrière Bouton d'alimentation Ce bouton d'alimentation permet d'allumer ou éteindre le kit Meet Compute System. Vous pouvez aussi l'utiliser pour basculer le kit Meet Compute System en mode veille ou appuyer sur ce bouton pendant environ quatre (4) secondes pour l'éteindre. Port combiné...
Page 82
Port Thunderbolt™ 4 Ce port Thunderbolt™ 4 présente les caractéristiques suivantes : • Vitesse de transfert jusqu'à 40 Gb/s pour les appareils Thunderbolt™ 4. • Prise en charge de DisplayPort 1.4 (7680 x 4320 @60Hz). • Rétrocompatible avec USB4 et USB 3.2. •...
Page 83
Port combiné USB 3.2 Gen 2 Type-C® / DisplayPort Le port USB Type-C® vous offre les avantages suivants : • Vitesse de transfert jusqu'à 10 Gb/s. • Prise en charge de DisplayPort 1.4 (7680 x 4320 @30 Hz). Ce port permet de connecter votre kit Meet Compute System à un périphérique d'affichage externe à...
Page 84
Prise d'alimentation Branchez l'adaptateur secteur sur cette prise pour convertir le courant alternatif en courant continu. Le courant passant par cette prise permet d'alimenter le kit Meet Compute System. Pour éviter d'endommager le kit Meet Compute System, utilisez toujours l'adaptateur secteur fourni. AVERTISSEMENT ! L'adaptateur peut atteindre une température élevée lorsque celui-ci est relié...
Côté gauche Fentes d'aération (entrée d'air) Ces fentes d'aération permettent à l'air frais de pénétrer à l'intérieur du châssis et de refroidir le kit Meet Compute System. IMPORTANT ! Assurez-vous qu'aucun objet ne bloque les fentes d'aération pour garantir une dissipation optimale de la chaleur et une bonne ventilation de l'air.
Prise en main Avant de configurer votre système, lisez attentivement et suivez toutes les instructions de la documentation, en particulier la section Consignes de sécurité des Annexes. Connecter un périphérique d'affichage à votre kit Meet Compute System Vous pouvez connecter l'appareil à un écran externe ou un vidéoprojecteur par le biais des interfaces de connexion suivantes : •...
Connecter l'écran tactile Pour connecter l'écran tactile au kit Meet Compute System : Connectez l'extrémité USB Type-C® du câble de données USB au port USB de votre écran tactile. Connectez l'écran tactile à un port USB 3.2 Gen 2 Type-A à l'arrière du kit Meet Compute System.
Page 91
Câble de données USB pour écran tactile...
Connecter le haut-parleur (pour les kits de salle) Pour connecter le haut-parleur au kit Meet Compute System : Connectez l'extrémité micro USB du câble de données USB pour haut- parleur au port USB de votre haut-parleur. Connectez l'autre extrémité du câble de données USB au port USB Type-A situé...
Connecter le haut-parleur (pour les kits de démarrage) Pour connecter le haut-parleur au kit Meet Compute System : Connectez l'extrémité micro USB du câble de données USB pour haut- parleur au port USB de votre haut-parleur. Connectez l'autre extrémité du câble de données USB à un port USB Type-A de votre kit Meet Compute System.
Connecter un haut-parleur d'extension (optionnel) Pour connecter en série des haut-parleurs d'extension : Connectez une extrémité d'un câble d'extension au port haut-parleur à l'arrière de votre haut-parleur principal. Connectez l'autre extrémité du câble d'extension au port OUT du haut- parleur d'extension. Pour connecter un deuxième haut-parleur d'extension, connectez une extrémité...
Connecter une caméra REMARQUE : Pour plus d'informations sur le port USB 3.2 Gen 2 Type-A recommandé pour connecter la caméra, consultez la section Connecter les câbles. Pour connecter une caméra ePTZ à votre kit Meet Compute System : Câble USB de la caméra (Type-C®...
Page 96
Pour connecter une caméra PTZ à votre kit Meet Compute System : Câble USB de la caméra (Type-B vers Type-A)
Page 97
Pour connecter l'écran tactile lors de présentations locales (optionnel) REMARQUE : Utilisez toujours le câble HDMI™ pour écran tactile. Connectez le câble HDMI™ pour écran tactile au port HDMI™ de votre écran tactile. Connectez l'écran tactile au port de sortie HDMI™ d'un appareil (tel qu'un ordinateur portable) lors de présentations locales.
Connecter le dongle de contrôle à distance (pour les kits de démarrage) Connectez le dongle de contrôle à distance au port combiné USB 3.2 Gen 2 Type-C® / DisplayPort situé à l'arrière de votre kit Meet Compute System à l'aide de l'adaptateur USB Type-C®...
Connecter l'adaptateur secteur à votre votre kit Meet Compute System Pour connecter l'adaptateur secteur à votre votre kit Meet Compute System : Connectez le cordon d'alimentation à l'adaptateur secteur. Reliez l'autre extrémité de l'adaptateur secteur à la prise d'alimentation (CC) du votre kit Meet Compute System.
Page 100
IMPORTANT ! • Il est fortement recommandé d'utiliser uniquement l'adaptateur secteur fourni avec votre votre kit Meet Compute System. • Il est fortement recommandé d'utiliser une prise reliée à la terre lors de l'utilisation de votre votre kit Meet Compute System. •...
Allumer votre kit Meet Compute System Appuyez sur le bouton d'alimentation pour allumer votre kit Meet Compute System. IMPORTANT ! Assurez-vous que tous les périphériques (haut-parleur, caméra, écran tactile) ainsi que l'adaptateur secteur sont correctement branchés avant d'allumer votre kit Meet Compute System.
Avant de commencer à utiliser votre appareil pour la visioconférence Pré-requis Taille et agencement de la pièce Votre kit de salle a été conçu pour une salle de conférence pouvant accueillir jusqu'à 13 personnes. Il est recommandé d'utiliser une pièce disposant d'une table longue, avec le moniteur placé...
Page 105
Pour une vidéo haute définition (HD) • La latence devrait être inférieure à 50 ms lorsque vous lancez une commande ping sur le serveur DNS public de Google à 8.8.8.8. • Le débit montant de chaque participant doit être d'au moins 3,2 Mb/s. •...
Page 106
Périphérique d'affichage et positionnement Votre kit Meet Compute System fonctionne avec les moniteurs de type vidéoprojecteur et téléviseurs LCD, LED et plasma. Le périphérique d'affichage doit posséder une prise d'entrée HDMI™ ou DisplayPort. Le périphérique d'affichage peut être placé sur une table collée contre un mur ou fixé...
Configurer votre système Vous pouvez placer votre kit Meet Compute System sur un mur grâce au kit de fixation murale ou utiliser le socle de fixation. AVERTISSEMENT ! • Tirer ou pousser sur le kit Meet Compute System peut entraîner la chut de l'appareil.
Page 108
Fixez le support de fixation murale au mur en utilisant les quatre (4) vis. REMARQUE : Les vis fournis sont des vis autotaraudeuses M3.5 à tête fraisée plate, d'une longueur de 24 mm. Repérez l'encoche du support de fixation au dessous de l'appareil et orientez-le comme indiqué...
Page 109
Votre appareil sera fixé par aimantation au support de fixation murale. Assurez-vous que l'encoche du support de fixation soit alignée avec la fixation murale avant de placer l'appareil sur la plaque de fixation. REMARQUE : Consultez le Chapitre 1 : Présentation de votre système de vidéoconférence pour plus d'informations sur l'emplacement de l'encoche du support de fixation.
Page 110
Utilisation du socle de fixation Pour attacher le kit Meet Compute System au socle de fixation fourni, veuillez suivre les étapes suivantes : Repérez l'encoche du support de fixation au dessous de l'appareil et orientez-le comme indiqué sur l'illustration ci-dessous afin que les fentes d'aération soient orientées vers le haut.
Page 111
Alignez l'encoche de fixation de l'appareil avec le socle de fixation, puis approchez l'appareil vers le socle. Votre appareil sera fixé par aimantation au socle de fixation. Si nécessaire, ajustez manuellement la position de l'appareil afin d'obtenir une fixation plus sûre.
Page 112
Connecter les câbles Utilisez les câbles inclus pour connecter votre kit Meet Compute System à d'autres composants système : REMARQUE : Les connexions apparaissant sur les illustrations sont les connexions recommandées, vous pouvez toutefois ajuster les connexions en fonction de vos besoins. Le port combiné...
Page 113
Le port USB 3.2 Gen 2 Type-A se connecte à l'écran tactile ou à la caméra. Le port USB 3.2 Gen 2 Type-A se connecte à l'écran tactile ou à la caméra. Ce port réseau permet de connecter un routeur. REMARQUE : Bien que vous puissiez utiliser votre kit Meet Compute System avec une connexion réseau sans fil, il est recommandé...
Enregistrer votre appareil Processus d'enregistrement de base Cette section explique les différentes étapes d'enregistrement de base applicables à la plupart des utilisateurs. Pour en savoir plus sur les autres options disponibles lors du processus d'enregistrement, consultez la section Options d'enregistrement avancées. REMARQUE : Il est recommandé...
Page 115
Lorsque l'écran de l'application Google Meet apparaît, suivez les instructions apparaissant à l'écran pour tester la caméra et le haut-parleur. REMARQUE : Si aucune image n'apparaît à l'écran ou si vous n'entendez aucun son lors du test : • Assurez-vous que la caméra et le haut-parleur sont bien connectés à votre kit Meet Compute System avant de l'allumer.
Page 116
Options d'enregistrement avancées Les utilisateurs peuvent utiliser le processus d'enregistrement tel que décrit dans la section Processus d'enregistrement de base pour enregistrer leur appareil. Toutefois, d'autres options sont disponibles pour les utilisateurs souhaitant personnaliser leur expérience ou en apprendre davantage. Hormis les options d'accessibilité...
Gérer les appareils et les salles Vous pouvez afficher, modifier et mettre à jour votre kit Meet Compute System et les salles grâce à la console administrateur Google. Pour plus de détails sur la gestion des appareils et des salles, veuillez consulter la page d'aide à la gestion du matériel Google Meet.
Résoudre un problème Gérer les appareils et les salles Comment identifier l'appareil kit Meet Compute System que je souhaite dans la liste des appareils disponibles. Vous pouvez identifier un appareil spécifique par le biais de son numéro de série. Vous trouverez cet identifiant sur la carte incluse dans la boîte ainsi que sous l'appareil.
Consignes de sécurité Votre kit Meet Compute System a été conçu et testé pour satisfaire aux normes de sécurité les plus récentes en matière d'équipements informatiques. Toutefois, afin de garantir une utilisation sans risque de ce produit, il est important que vous respectiez les consignes de sécurité...
Configurer le système • Avant d’utiliser votre système, lisez et suivez les instructions de la documentation. • N’utilisez pas ce produit à proximité de liquides ou d’une source de chaleur. • Positionnez le système sur une surface stable. • Les ouvertures situées sur le boîtier de l’appareil sont destinées à la ventilation.
Précautions à suivre lors de l'utilisation • Ne marchez pas sur le cordon d'alimentation et ne posez rien dessus. • Ne renversez pas d'eau ou d'autres liquides sur le système. • Lorsque le système est éteint, une certaine quantité de courant résiduel continue de circuler dans le système.
Page 125
Avertissement sur les batteries Lithium-Métal ATTENTION: Danger d'explosion si la batterie n'est pas correctement remplacée. Remplacer uniquement par une batterie de type identique ou équivalent, comme recommandé par le fabricant. Jetez les batteries usagées conformément aux instructions du fabricant. PAS DE DÉMONTAGE La garantie ne couvre pas les appareils ayant été...
Informations réglementaires Notice relative au revêtement de l'appareil IMPORTANT ! Pour maintenir le niveau de sécurité électrique et fournir une meilleure isolation, un revêtement a été appliqué pour isoler le châssis de cet appareil. Veuillez toutefois noter que les zones de l'appareil où...
Page 127
Déclaration ISDE relative à l'exposition aux fréquences radio au Canada Cet équipement a été testé et s'est avéré conforme aux limites établies par ISDE en matière d'exposition aux radiations dans un environnement non contrôlé. Afin de rester en conformité avec ces exigences, évitez tout contact direct avec l'antenne pendant la transmission et suivez les instructions d'utilisation de ce manuel.
Page 128
ASUS développe une conception écologique pour tous ses produits et s'assure que des standards élevés en terme de protection de l'environnement sont respectés tout au long du processus de fabrication. De plus, ASUS met à votre disposition des informations sur les différentes normes de respect de l'environnement.
Page 129
Produits homologués EPEAT (Electronic Product Environmental Assessment Tool) La diffusion publique des informations environnementales essentielles pour les produits ASUS homologués EPEAT est disponible sur : https://esg.asus.com/ en/Ecolabel.htm. Plus d'informations sur le programme EPEAT et des conseils d'achat peuvent être trouvés à www.epeat.net.
Need help?
Do you have a question about the GQE20A and is the answer not in the manual?
Questions and answers