What’s in the Box (NVR System) NVR Introduction USB Port Power LED HDD LED Control Panel Power Switch Power Input NVR Power Adapter HDMI Cable Audio out USB Port VGA Port HDMI Port LAN Port PoE Interface USB Mouse 1M Network Cable Quick Start Guide Mount the Camera to the Ceiling Power LED: Solid green to indicate the NVR is powered on.
Connection Diagram Power LED Connect the NVR (LAN port) HDD LED to your router with an Ethernet cable. Next, connect the mouse USB Port to the USB port of the NVR. Power Switch LAN Port Power Input Audio out HDMI eSATA Port Connect the NVR to the monitor with a VGA or HDMI cable.
NOTE: The password should be at least 6 characters. It is recommended that you note down the password and keep it in a secure place. Access the NVR via Smartphone or PC Download and launch the Reolink App or Client software and follow the instructions to access the NVR. Connect the NVR to a power outlet and turn on power switch.
NOTE: The NVR is compatible with both PoE and Wi-Fi cameras and allows the connection of up to If it still doesn’t work, please contact Reolink Support https://support.reolink.com 8 cameras(RLN8-410) or 16 cameras(RLN16-410).
Internet access available. Camera • Please reboot your NVR and home router and try again. • If it still doesn’t work, please contact Reolink Support https://support.reolink.com Operating Temperature: -10C to 55°C (14°F to 131°F) English...
This product comes with a 2-year limited warranty that is valid only if purchased from Reolink the instructions, may cause harmful interference to radio communications. However, there is no Official Store or a Reolink authorized reseller.
Need help?
Do you have a question about the PoE NVR System and is the answer not in the manual?
Questions and answers