Advertisement

Quick Links

IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical Appliance, basic
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS APPLIANCE
SAVE THESE INSTRUCTIONS
1. This Appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory, or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the Appliance in a safe way
and understand the hazards involved. Children
shall not play with the Appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
2. Clear the area to be cleaned. Remove power
cords and small objects from the floor that
could entangle the Appliance. Tuck rug fringe
under the rug base, and lift items such as
curtains and tablecloths off the floor.
3. If there is a drop off in the cleaning area due
to a step or stairs, you should operate the
Appliance to ensure that it can detect the step
without falling over the edge. It may become
necessary to place a physical barrier at the
edge to keep the unit from falling. Make sure
the physical barrier is not a trip hazard.
4. Only use as described in this manual. Only
use attachments recommended or sold by the
manufacturer.
5. For INDOOR household use ONLY. Do not
use the Appliance in outdoor, commercial, or
industrial environments.
6. Do not use without dust bin and/or filters in place.
7. Do not operate the Appliance in an area
where there are lit candles or fragile objects.
8. Keep hair, loose clothing, fingers, and all parts of
body away from any openings and moving parts.
9. Do not operate the Appliance in a room where
an infant or child is sleeping.
10. Do not use and store in extremely hot or
cold environments (below -5˚C /23˚F or
above 40˚C/104˚F). Please charge the robot
in temperature above 0°C/32°F and below
40°C/104°F.
1 EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DLX71 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ECOVACS DLX71

  • Page 1 IMPORTANT SAFETY INSTRUCTIONS 3. If there is a drop off in the cleaning area due to a step or stairs, you should operate the IMPORTANT SAFETY INSTRUCTIONS Appliance to ensure that it can detect the step When using an electrical Appliance, basic without falling over the edge.
  • Page 2 Instruction Manual. 14. Do not use Appliance to pick up anything that Ecovacs Home Service Robotics cannot be is burning or smoking, such as cigarettes, held liable or responsible for any damages or matches, hot ashes, or anything that could injuries caused by improper use.
  • Page 3: Device Update

    as a handle, close a door on the power cord, or power OFF the robot for storage and unplug pull power cord around sharp edges or corners. the OMNI Station. Do not run Appliance over the power cord. 32. WARNING-Add clean water into the clean Keep power cord away from hot surfaces.
  • Page 4 The remote surveillance is for the absolute private use of non-public, private owned places for the pure Caution: hot surface self-protection and single control intended only. Please be aware of the local data protection based Short-circuit-proof safety isolating legal obligations in case of use. No surveillance of transformer public places, especially with clandestine intent and/or on the part of the employer without justified...
  • Page 5 European Union Compliance Statement Information on Disposal for Users of used batteries Information on Disposal for Users of Waste Electrical & Electronic Equipment This symbol means that batteries and accumulators, at their end-of-life, should not be mixed with unsorted This symbol on the product or on its packaging municipal waste.
  • Page 6: Radio Equipment Directive

    Restriction of the use of certain hazardous Europe Authorised Representative: substances (RoHS) Directive ECOVACS Europe GmbH Ecovacs Home Service Robotics Co., Ltd. hereby Holzstrasse 2 | D-40221 Düsseldorf | Germany declares the whole product including parts (cables, Ecovacs Home Service Robotics Co., Ltd. hereby...
  • Page 7: Package Components

    PACKAGE COMPONENTS PACKAGE CONTENTS Robot OMNI Station Base Power Cord Instruction Manual Please read all instructions before using the Appliance and keep this manual properly. Side Brush Instruction Manual * Figures in this manual are for reference only and may differ from the appliance. Product design and specifications are subject to changes without notice. 7 EN...
  • Page 8 PRODUCT DIAGRAM Robot Bottom Back View Top Cover Navigation Anti-drop Sensors Module Buttons on the Carpet Detection robot Universal Wheel Sensor Obstacle Avoid- Side Brush ance Module Bumper Roller Brush Brush Release Buttons Button Press: Exit/Return to the station Press and hold: Self-Cleaning Driving Wheels (...
  • Page 9 Charging Contacts Mop Washing Tray Note: • Flashing Red: Please check the ECOVACS HOME App for the reason. • If the robot fails to charge, please wipe charging contacts with a clean and dry cloth. Dust Bag Dust Bag Handle...
  • Page 10: Indicator Light

    Indicator Light Light Effect State Breathing White Charging Solid White Fully Charged/Running Robot White Light Flashes 3 Times Power Button Triggered, Task Starts/Pauses/Continues Solid Red Low Battery Flashing Red Alarm Solid White Standby/Running Station Flashing Red Malfunction Goes Out Power Outage/ Deep Sleep Mode...
  • Page 11: Sensors Overview

    The robot thereby detects the carpet's presence. In the ECOVACS laboratory, more than 50 types of carpets available on the market are identified. With the principle of the Optocoupler Switch, the robot will avoid obstacles when they are about Anti-collision Sensor to collide.
  • Page 12: Notes Before Cleaning

    INITIAL SETUP AND USE Notes Before Cleaning Tidy up the Area to be Cleaned Open Doors and Help robot Explore For the maximum cleaning area possible, before using the robot, please Open all room doors to help the robot fully explore your house during put furniture, such as tables, chairs, and pedestal fans, in their proper the first cleaning.
  • Page 13: Quick Start

    0.05 meters on either side and 0.8 meters in front. 2. Search "ECOVACS HOME" on the App Store or Google Play to download the App. • If there are reflective objects such as mirrors and reflective skirting lines near the Station, the bottom 14 cm of such objects should be covered.
  • Page 14 Policy and User Agreement so that we can process some of your essential and necessary information before you can use certain features ECOVACS products offer smart functions such of the ECOVACS HOME App to control the Appliance. If you disagree as network setup, mapping, and cleaning ECOVACS HOME with our Privacy Policy and User Agreement, such features will be un- mode selection (specific to each product).
  • Page 15 Fill the Clean Water Tank Take out the clean water tank, open the tank cover, and fill the tank with water up to Use the ECOVACS HOME App to recall the robot, or press on the robot to the maximum water level. Close the tank cover and re-install the clean water tank.
  • Page 16 Operate the robot 2. Unlid the cleaning solution unit and fill it with ECOVACS cleaning solution (sold separately). Put the lid on and the unit back to the station. 1. Start Mapping When creating a map for the first time, please follow the robot to help resolve some minor issues.
  • Page 17 3. Pause 6. Deep Sleep Mode on the robot to pause it while it is working. You can also use the ECOVACS The robot will enter deep sleep mode if it stays outside the station for about 10 h to HOME App to pause the robot.
  • Page 18: Regular Maintenance

    Clean Water Tank Every 3 months Dirty Water Tank Every month Dust Collection Cabin Every month Body and Bottom of the Station Every month Cleaning Solution Unit Every month Note: Explore more accessories in the ECOVACS HOME App or at https://www.ecovacs.com.
  • Page 19 Maintain Dust Bin and Filter 4. Rinse the dust bin and filter with water and shake off the water droplets. 1. Open the cover and empty the bin. Note: • Please rinse the filter with water as shown. 2. Open the filter net and remove the filter. •...
  • Page 20 Maintain Main Brush and Side Brush 4. Install the brush comb, the main brush and the main brush cover. Note: Explore more accessories at ECOVACS HOME App or at https://www. ecovacs.com Clean the Roller Brush 1. Open the cover. 2. Remove and clean the main brush.
  • Page 21 Maintain Other Components Clean the navigation module Note: Explore more accessories at ECOVACS HOME App or at https://www. ecovacs.com. • Wipe the components with a clean, dry cloth. Never use a wet cloth. Do not use cleaning sprays or detergents.
  • Page 22 Maintain Dust Bin Clean the Anti-drop sensor 1. Discard the dust bag. Take out the dust bag by lifting the handle to prevent dust leakage. 2. Clean the dust collection cabin with a dry cloth and put a new dust bag in.
  • Page 23: Troubleshooting

    Maintain Mop Washing Tray Storage 1. Take off the base and the mop washing tray and clean them. Please fully charge and power off the robot before storage. Place the robot back at the station before pressing and holding [icon] for 3 s to power off the robot.
  • Page 24 2. Do not use a 5 Ghz network. Incorrect App installed. Please download and install the ECOVACS HOME App. The robot does not support 5 GHz networks. Please use a 2.4GHz or Not using a 2.4 GHz or 2.4/5 GHz mixed network.
  • Page 25 Tidy up your home, set a physical barrier, or set a virtual boundary The robot is stuck in a narrow area. via the ECOVACS HOME App. Before cleaning, please tidy up scattered wires, slippers, and other objects on the ground as much as possible. If there are any missing...
  • Page 26 Please do not move it manually. In Do Not Disturb mode, the robot will not empty the Cancel Do Not Disturb mode in the ECOVACS HOME App or dust bin after returning to the station. manually start dust emptying.
  • Page 27 Malfunction Possible Cause Solution Please rotate and press the driving wheels to check for and remove The driving wheels are The driving wheels are entangled or jammed by foreign any foreign objects that are entangled or jammed. If this problem jammed.
  • Page 28: Technical Specifications

    Output power of the wireless module is less than 100mW. Note: Technical and design specifications may be changed for continuous product improvement. Explore more accessories at https://www.ecovacs.com. Please use the mobile camera to scan the QR code and obtain the user guide.

This manual is also suitable for:

Deebot t30c

Table of Contents