Page 4
TE 800-AVR Original operating instructions ........
Page 5
The accompanying documentation corresponds to the current state of the art at the time of printing. Please always check for the latest version on the product’s page on Hilti’s website. To do this, follow the link or scan the QR code in this documentation, marked with the symbol •...
Page 6
Item reference numbers are used in the overview illustration and refer to the numbers used in the key in the product overview section. This symbol is intended to draw your special attention to certain points for handling the product. Product-dependent symbols 1.3.1 Symbols on the product The following symbols are used on the product:...
Page 7
▶ Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. ▶ If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
Page 8
▶ Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some examples are: lead or lead-based paints; brick, concrete and other masonry products, natural stone and other products containing silicates; certain types of wood, such as oak, beech and chemically treated wood;...
Items supplied Breaker, side handle, operating instructions. Other system products approved for use with this product can be found at your local Hilti Store or at: www.hilti.group | USA: www.hilti.com Technical data Breaker For details of the rated voltage, current, frequency and/or input power, please refer to the power tool’s...
▶ The product is ready for use. 3. Pull the chuck back as far as it will go and remove the accessory tool. Use only the recommended grease supplied by Hilti. Use of unsuitable grease may cause damage to the product.
Page 11
WARNING Risk of injury! The tool becomes hot as a result of use. ▶ Wear protective gloves when changing the tool. ▶ Remove the accessory tool. 5.1.4 Positioning the chisel CAUTION Risk of injury! Loss of control over the chisel direction. ▶...
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Store or online at: www.hilti.group.
Page 13
A fault has occurred in the tool. ▶ Have the tool repaired by Hilti Service. No hammering action. The power tool is too cold. ▶ Bring the tip of the drill bit...
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
The manufacturer declares, on his sole responsibility, that the product described here complies with the applicable legislation and standards. The technical documentation is filed here: Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany Product information Breaker...
Page 28
The manufacturer declares, on his sole responsibility, that the product described here complies with the applicable legislation and standards. The technical documentation is filed here: Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany Product information Breaker...
Need help?
Do you have a question about the TE 800-AVR and is the answer not in the manual?
Questions and answers