Tektronix 3A74 Calibration Procedure

aS
| | | |
test equipment used, and (or) allows *or changes
in environmental conditions.
has the same sequence of steps and the same
Procedure.
detailed instructions for the calibration of
in test equipment and plug-in scopes, etc.
Abbreviations in this procedure will be found
listed in TEKTRONIX STANDARD A-100. Definitions
of terms used in this procedure may be found in
TEKTRONIX STANDARD A-101.
In this procedure, all front panel control labels
labels are capitalized only (Gain Adj, etc).
This procedure has been prepared by Test-Final Staff
Engineering. For information on changes made to
this procedure, to make suggestions for changing
this procedure, or to order additional copies:
please contact T-FSE, 39-307.
'ion
©, 1969 TEKTRONIX, INC., PO Box 500
BEAVERTON, OREGON. All rights reserved.
T-FSE COMPANY CONFIDENTIAL | Page 1 of 19
PROCEDURE
This procedure ts
July 1969
For all sexdal
numbers. ~