Each power connector (Anderson PowerPole) must be fused with a fuse rated to 70A or less. 2.1.2) DO NOT obstruct fan vents along the side of the MCS-NX-16. Do not install any equipment on top or underneath the MCS-NX-16. The above installation requirement must be followed for safe operating and extended product...
MCS-NX-16 Installation Guide 4.1.5) Connector A - High Power Outputs Function Function High Power Output 1 User define Output (Positive Switched 20A) High Power Output 2 User define Output (Positive Switched 20A) High Power Output 3 User define Output (Positive Switched 20A)
MCS-NX-16 Installation Guide 4.1.8) HANDSET/CAN1 - System Connector Name Function CAN1L CAN bus Low connection (CAN-FD) CAN1H CAN bus High connection (CAN-FD) MIC- Negative Microphone input signal Supply Supply feed through for handsets (1A Fused) Ground Chassis MIC+ Positive Microphone input signal...
MCS-NX-16 Installation Guide 4.1.14) CAN2 Connector Name Function CAN2H CAN2 High (CAN-FD) No Connection CAN2L CAN2 Low (CAN-FD) 4.1.15) RST - Reset Button Button for resetting of the unit. 4.1.16) SEL - Select Button Button for selecting what information is displayed by the LEDs on the unit.
MCS-NX-16 Installation Guide Version History 5.1) Version Changes Responsible Date Person(s) Initial document release KJVR 2021/06/17 Added Images and drawings KJVR 2021/06/23 Updated Connector labelling KJVR 2021/07/02 Added Connector Receptacles list KJVR 2021/07/07 Corrected Connector E and updated Input descriptions...
Need help?
Do you have a question about the MCS-NX-16 and is the answer not in the manual?
Questions and answers