NAIM FLASH REMOTE HANDSET Manual page 8

Softkeys
The softkey setup menu allows alternate commands to be
assigned to any of the 8 softkeys on each of the 13 pre-
defined product pages.
To assign a softkey, select the required product page using
the OK (OK) key (press EXIT (EXIT) at any time to return to the
instructions page). Then press the required softkey, indicated
by a permanent underline. The UP (5)/ DOWN (6) keys can
then be used to select any one of the available commands
(see appendix 2).
Each command has a product ID to indicate which product the
command controls according to the following key: p-preamp,
r-record, c-cd, t-tuner, a-av, d-dvd, s-sub. If a command for a
product other than the selected page product is chosen, the
product ID will be displayed in the main display.
Appendix 3 contains default product and user preference
tables.
Reset
Resets remote handset to factory defaults settings.
WARNING all programmed softkeys will be lost.
6