Hi-Cap, Flatcap 2x, naPsa and naPsC Do not under any circumstances allow anyone to modify Power supply specifications your naim equipment without first checking with the factory, your retailer, or your distributor. unauthorised modifications Declarations of Conformity will invalidate your guarantee.
I nt ro duction naim audio products are conceived with performance as the top priority. Careful installation will help ensure that their full potential is achieved. This manual covers all power supplies. It begins with some general installation notes and statutory safety warnings.
It is essential that repairs and updates are only carried amplifiers are switched on. This is normal, will not cause out by an authorised Naim retailer or at the factory by any loudspeaker damage and does not point to any fault Naim itself.
Page 5
4 . 1 CD 55 5P s re a r note: The CD555PS can be used to power the CD555, mains input CDS3 and CDX2 CD players. In the case of the CDS3 and...
Page 6
Hi-Cap, Flatcap 2x, NAPSA, and NAPSC Power Supplies 5 P ower supp ly I nst allat ion Power supplies should be installed on an equipment rack intended for the purpose in their final location before connecting cables or switching on. ensure that power amplifiers are switched off and the preamplifier volume is turned down before power supplies are switched on.
7 De clara tion of confor mit y t o ap p r o p ria t e st an dards manufacturer naim audio Limited, southampton road, salisbury, england, sP1 2Ln Products CD555Ps supercap, XPs, Hi-Cap, Flatcap 2x, naPsa, naPsC...