Advertisement
Quick Links
092603 RevA
GLX-HYDXFMR
Replacement Transformer
Step 1
IMPORTANT: To Prevent Electrical Shock, Make Sure
All Power Sources Are Disconnected From The Unit Be-
fore Starting!
Remove Front Panel by removing the two screws using
a 5/16 nut driver.
Step 2
Disconnect the 2-pin connector with the yellow wires
from the main board.
2-Pin Connector
Yellow Wires
Step 3.
Disconnect the 4-pin connector with the blue, white,
purple, and gray wires from the main board.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Advertisement
Related Manuals for Hayward GLX-HYDXFMR
Summary of Contents for Hayward GLX-HYDXFMR
- Page 1 Disconnect the 2-pin connector with the yellow wires from the main board. 2-Pin Connector Yellow Wires Step 3. Disconnect the 4-pin connector with the blue, white, purple, and gray wires from the main board. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
- Page 2 Unbox the GLX-HYDXFMR replacement transformer and place it in the can where the old transformer used to be. Step 7. Screw down the GLX-HYDXFMR using the 4 screws provided and a 5/16 nut driver. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
- Page 3 Replace the front panel using the two screws that were previ- ously removed using a 5/16 nut driver. Step 11. Installation is now complete. It is now safe to restore power to the system. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
- Page 4 Hayward Pool Products 620 Division Street, Elizabeth NJ 07207 Phone (908)-355-7995 www.hayward.com USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
Need help?
Do you have a question about the GLX-HYDXFMR and is the answer not in the manual?
Questions and answers