Download Print this page
U-Line H-11827 Manual
U-Line H-11827 Manual

U-Line H-11827 Manual

Industrial dehumidifier - 219 pint

Advertisement

Quick Links

H-11827
INDUSTRIAL DEHUMIDIFIER –
219 PINT
IMPORTANT! Unplug unit before opening cover
for cleaning or servicing.
WARNING! Explosion or combustion hazard due
to flammable refrigerant.
WARNING! Electric shock hazard, rotating fan,
hot surface hazards. Unit must be grounded.
• Do not drill into or braze the dehumidifier.
• Do not attempt to service the refrigeration system.
Only authorized service center personnel should
service or decommission the refrigeration system.
• Do not use or store near ignition sources,
combustible gases, electric heaters or open flames.
• Be aware that refrigerant gases can be odorless.
• Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug
(not the cord) to unplug.
• Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong. Do not use an
extension cord.
NOTE: For best results, operate dehumidifier in an enclosed area. Close all doors and windows that open to
the outside to maximize water removal efficiency. Place dehumidifier away from obstructions and keep it
away from anything that could block airflow into and out of the unit.
IMPORTANT! Transporting or storing the unit in a horizontal position is not recommended. When the
machine is placed in a horizontal position, the oil from the compressor can flow into the refrigerant coils
and reduce the ability of the dehumidifier to function and possibly damage the unit. If the unit has been
placed in a horizontal position, set it upright and let it stand for at least 30 minutes before turning it on.
PAGE 1 OF 6
1-800-295-5510
uline.com
SAFETY
• Unit must be operated on a 115 V/60 Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
• Keep motor and wiring dry.
• Do not use in environments where corrosive
chemicals, such as chlorine, are present.
• Do not expose the control panel to moisture,
snow or rain.
• Dehumidifier should not be used by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they are given supervision or
instruction. Children should not be allowed to play
with the unit.
• For proper disposal, unit should be taken to a
recycling entity authorized to process refrigeration
equipment.
• Do not attempt to repair the unit. For authorized
service centers, contact Uline Customer Service at
1-800-295-5510.
SETUP
0125 IH-11827

Advertisement

loading
Need help?

Need help?

Do you have a question about the H-11827 and is the answer not in the manual?

Questions and answers

Summary of Contents for U-Line H-11827

  • Page 1 H-11827 1-800-295-5510 uline.com INDUSTRIAL DEHUMIDIFIER – 219 PINT SAFETY IMPORTANT! Unplug unit before opening cover • Unit must be operated on a 115 V/60 Hz circuit for cleaning or servicing. protected by a Ground Fault Circuit Interrupter (GFCI) device. WARNING! Explosion or combustion hazard due to flammable refrigerant.
  • Page 2: Operation

    OPERATION EXTEND HANDLE Drain Hose Release the handle by rotating red locking lever Storage outward, then lift handle up into place. Rotate red lever back into locked position to secure handle in operating position. NOTE: Do not use the extended handle to lift the unit off the ground horizontally.
  • Page 3: Control Panel

    OPERATION CONTINUED CONTROL PANEL Job 0.0h Thu Sep 17 2:27 PM Job 0.0h Thu Sep 17 2:27 PM Inlet Outlet Inlet Outlet 80.0 F 60% 107.1 F 48% ° ° 91 GPP 67 GPP ∆24 GPP Menu Purge Power Menu Purge Power UNIT OFF...
  • Page 4: Maintenance

    MAINTENANCE WARNING! Electric shock hazard. Unplug unit CAUTION! Risk of dust and contaminants before cleaning or servicing. exposure. Use of respirator mask and gloves is recommended. If unit has been exposed to NOTE: This unit is fitted with sensitive electronic potentially dangerous contaminants, clean sensors.
  • Page 5: Troubleshooting

    TROUBLESHOOTING ERROR MESSAGES In the case of an error, the unit will not operate until If the control system detects a problem, an "Alert" the problem is resolved. Refer to the explanations and symbol will appear in the upper right corner of the solutions shown below.
  • Page 6 TROUBLESHOOTING CONTINUED OPERATING ISSUE CAUSES RECOMMENDATIONS Water drips out when Unit was unplugged before Purge unit before moving. See moving unit. purging was complete. "Transporting" on page 3. Unit does not operate. Unit not switched on. Switch unit on. No power to machine. Plug in unit;...