Advertisement
Quick Links
Description
AKG's new C 4500 B-BC is designed for all broadcast and
voice-over applications and is ideal for the new age of digital
broadcasting. It has a 1-in. (25-mm) diaphragm mounted
internally so that the axis of maximum sensitivity is along the
microphone's physical axis, ensuring that the microphone
does not impede the viewing range of the announcer. The
response of the C 4500 B-BC has been tailored so that at
normal operating distances the microphone will have
absolutely neutral low frequency response, and at high
frequencies the response is smooth and extended. An
exemplary dynamic range of 137 dB will allow it to cope with
virtually all announcing and postproduction speech activities.
The C 4500 B-BC is complete with its own suspended
shock mount and pop/wind windscreen for further isolation
from the environment. Extremely high internal electrostatic
and magnetic field isolation ensures that the microphone can
be operated in proximity to virtually any kind of electronic
equipment, new or old.
Specifications
Polar pattern:
cardioid
Frequency range:
20 to 20,000 Hz
Sensitivity at 1000 Hz: 25 mV/Pa (-34 dBV)
Maximum SPL for 0.5% THD: 145/165 dB SPL*
Equivalent noise level: 8 dB-A
Pre-attenuation pad:
-20 dB, switchable
Bass-cut filter:
6 dB/octave below 120 Hz
Output impedance:
<200 ohms
Recommended load impedance: >1000 ohms
Power requirement:
9 to 52 volts phantom power
(DIN 45 596/IEC 268-15)
Current consumption: <2 mA
Size:
2.2 in. diameter x 7.2 in. length
(58 mm x 183 mm)
Net weight:
16 oz. (450 g)
*Values for 48 V phantom power; reduce by 6 dB for 24 V or 18
dB for 12 V phantom power
Standard set includes:
C 4500 B-BC microphone, H100 spider-type shock mount
W 4000 foam windscreen
Optional accessories: B 18 E battery power supply
C 4500 B-BC
Condenser Broadcast/Voice-Over Microphone
Features
• Frequency response, tailored for
reduced proximity effect for close
speaking voice
• Operates on phantom power
(9 to 52 volts)
• Large diaphragm with speech
entry along the microphone's
physical axis
• Extremely low self-noise floor
of 8 dB-A
• High immunity to overload
(145 dB unpadded)
• High immunity to electrostatic and
magnetic field interference
Advertisement
Related Manuals for AKG C 4500B-BC
Summary of Contents for AKG C 4500B-BC
-
Page 1: Specifications
Condenser Broadcast/Voice-Over Microphone Description AKG’s new C 4500 B-BC is designed for all broadcast and voice-over applications and is ideal for the new age of digital broadcasting. It has a 1-in. (25-mm) diaphragm mounted internally so that the axis of maximum sensitivity is along the microphone’s physical axis, ensuring that the microphone does not impede the viewing range of the announcer. -
Page 2: Architects And Engineers Specifications
(We will not repair transit damage under the no-charge terms of this warranty.) Note: No other warranty, written or oral is authorized by AKG Acoustics, Inc. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts, so the above exclusions and limitation may not apply to you.